Home > Suspension > Dodge > 2013+ Ram 2500/3500 > Carli Suspension > 2013+ Ram 3500 > Suspension Systems >

Carli Suspension 2013+ Ram 3500 Fox 2.0 Leveling Kit
Carli Suspension 2013+ Ram 3500 Fox 2.0 Leveling Kit

Our Price: $999.00

Availability:: Usually Ships in 24 Hours
Product Code: CS-DLEVELING-13-D

Adjustable Track Bar:

Torsion Sway Bar:

Radius Arms:

Carli created their 2013+ Ram 3500 leveling system for the customer that keeps their truck on the road with an eye for quality and appreciation for bang-for-their-buck. At the heart of this system is a 2.5” lift, Linear Rate Coil Spring paired to matched travel Fox 2.0” IFP Shocks that have been custom tuned, in house, for superior ride quality and handling. The rear shocks are also included with this system and, although they’re designed for stock ride height, have been custom tuned as well. For those that aren’t looking for massive increase in travel or big shocks but still want to attain a leveled stance and improved ride quality and handling characteristics, this is the perfect kit. The 2.5” lift height doesn’t require the geometry correction of Carli's 3” Systems.

The front axle will be slightly pulled to the Driver’s side following installation of the lift; this can be corrected with the addition of our Adjustable Track Bar. Further, ride quality can be substantially increased with the addition of Carli's Torsion Sway Bar. We recommend a 35” tire on an 18” wheel that’s no more than 9” wide with 5.5”-6” Backspace. With minor inner fender liner trimming, 37" tires can be run on an 8-9" wide wheels with 5.5"-6" of backspacing. Recommended unloaded tire pressure is 45F/40R. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.

*This system will NOT be upgradeable to any other Carli Suspension Systems. It’s designed to be a solution for customers wanting a quality system with minimal lift and part inclusion. Carli recommends slight eccentric bolt compensation to correct caster after the lift as there are no Radius Arm Drops. For this reason, customers may experience a slight bow in the coil spring. Carli did not experience a coil bow in any of their test trucks but it’s possible at the 2.5” lift height without a Radius Arm Drop Bracket.


-Front Fox 2.0 IFP Carli Tuned Shocks
-Rear Fox 2.0 IFP Carli Tuned Shocks
-Front Linear Rate Coils


-2.5" Front Lift
-Stock Rear Height/Towing Capacity
-Level Ride Height
-Designed for Diesel Applications Only

Installation Instructions

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  1 of 1 people found the following review helpful:
Must do for any 3500 November 8, 2017
Reviewer: Jerry Martin from Lancaster Ca  
Ive researched high and low to find the best leveling kit for my 2017 3500, I had emailed the guys at CJC Offroad a few times about this kit and another companies kit and they highly spoke of this kit. I will say it was the best choice by far. It improved the ride quality so much and I am so happy with it. These guys know what they are doing and I wish I knew about this kit for my last few trucks.

Was this review helpful to you?