PML GM Allison 1000 Deep  Transmission Pan - CJC Off Road
PML GM Allison 1000 Deep  Transmission Pan - CJC Off Road
PML GM Allison 1000 Deep  Transmission Pan - CJC Off Road

PML GM Allison 1000 Deep Transmission Pan

9517-0001

Regular price $390.00 Save $-390.00

0 in stock

Volume: 3.25 qts. over stock

Dimensions: Click here for dimensions.

Number of Bolts: 12

This PML pan fits 2001 to 2014 Chevrolet & GMC full size trucks with the Allison 1000 5 & 6 speed automatic transmission.

The Allison transmission is found in the Silverado & Sierra 2500 & 3500 with the Duramax diesel or 8.1 liter gas engine.

  • 2001 to 2014 Sierra 2500HD, 8.1 V8 or Duramax Diesel
  • 2001 to 2014 Silverado 2500HD, 8.1 V8 or Duramax Diesel
  • 2001 to 2014 Sierra 3500 or 3500HD, 8.1 V8 or Duramax Diesel
  • 2001 to 2014 Silverado 3500 or 3500HD, 8.1 V8 or Duramax Diesel
  • 2007 Sierra 2500HD Classic, 8.1 V8 or Duramax Diesel
  • 2007 Silverado 2500HD Classic, 8.1 V8 or Duramax Diesel
  • 2007 Sierra 3500 Classic, 8.1 V8 or Duramax Diesel
  • 2007 Silverado 3500 Classic, 8.1 V8 or Duramax Diesel

This pan may also fit 2006 and 2007 H1 Hummers. Please check carefully for fit and interference on this vehicle.

Gasket

The only gasket we know about for the Allison is the reusable gasket. A flexible, thin rubber cork gasket works best with PML pans. With the thick, hard reusable gasket, make sure that it is clean and free of nicks or there will be a leak. You may need to file down the gasket bolt holes so the PML pan seals correctly. Some installations have used a very thin bead of silicon (RTV) instead of the gasket.

Installer must verify transmission, filter, gasket and fitment based on the individual vehicle. This information provided for reference only.

PML Pan Drain and Optional Temperature Sending Unit Machining

PML Allison tranny pan, drain, as-cast
Click on image to view larger.

The drain for this pan is on the front side of the pan for easy access. A magnetic drain plug and all mounting bolts are included with the pan.

The pan has a boss on the inside of the casting that can be machined for a temperature sensor. This is also located on the front edge. The pan can accommodate between 1/8 and 1/2 NPT. If you wish PML to drill and tap the pan, there is a $40 machining charge. You will need to order over the phone and specify the size.

Filters and Filter Supports

The transmission pan features filter supports that are an integral part of the floor.

Out of the box the filter supports are set up to work with filter part number 29542833. This filter works with the PML transmission pan on all years of the Allison transmission (2001 to 2014).

PML pan filter supports Allison filter PML Allison tranny pan, on 2005 transmission PML Allison pan on 2011 transmission
Click on an image to view larger. The pan has been cut away so you can see the filter supports and filter.

From left to right:
inside of PML pan, showing filter supports
filter part number 29542833
filter 29542833 with the PML pan on a 2005 Allison transmission
filter 29542833 with the PML pan on a 2011 Allison transmission

Our thanks to Revmax Torque Converters for the pictures and assistance.

Other filters are available. Shorter filters (such as part number 29537965) will NOT work. For longer or deeper filters, the filter supports in the PML pan can be shortened. Once the filter supports in the PML pan are altered, you MUST keep using a filter of the same length otherwise the filter will fall out of the valve body. Additional information and pictures of the filter supports.

Information about filters for reference only. Installer should verify transmission, filter, and fitment based on the individual vehicle.

Installations

2004 Silverado 2500HD

John Brown installed our Allison transmission pan on his 2004 Chevy Silverado, 2500HD Duramax. He selected the black powder coat finish. Our thanks to John for sending us the images.

PML transmission pan installed on an Allison transmission. Silverado 2500HD Duramax with a PML transmission pan installed.

Sun Coast Converters

PML pan on an Allison transmission

This image shows the PML transmission pan on a transmission built by Sun Coast Converters. The pan is cut-away so the picture shows the filter supports holding the filter. The filter is the shallow stock filter so the filter supports are at full height.

PML Transmission Pan Features

  • Increased oil capacity for cooler temperatures
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Magnetic drain plug for easier, less messy maintenance
  • Mounting hardware provided

Find out why you should buy a PML transmission pan.

Gasket and filter not included (use stock parts).

Learn more about finishes and construction of PML parts.

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please place your order over the phone if you would like machining.

For a larger picture, please click on one of the above images. A separate window or tab will open showing a bigger picture. (The larger pictures take a minute to display.)





















Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)