Home > Suspension > Toyota > Tundra > 07-15 Tundra > Icon Vehicle Dynamics > Individual Components & Accessories
Sort By:
Page of 1
Icon Vehicle Dynamics 198000 - 2 Pin Spanner Wrench - ALL ICON Coil-over Shocks

Overview:

This 2 Pin Spanner Wrench is a must to adjust your ICON Coil-over Shocks. The Two Pin deisgn makes it easier to adjust no matter how much room you have to insert the wrench.

Our Price: $28.99
Icon Vehicle Dynamics ICON Tubular UCA Uniball Cover Cap Kit

Overview:

ICON Vehicle Dynamics tubular upper control arms do an exceptional job of adding strength and performance to your truck while also correcting suspension geometry and reducing OE balljoint bind in lifted applications. The 1” PTFE-lined stainless steel uniball that can be found in ICON upper control arms is a high-quality component, but its location on the vehicle leaves it vulnerable to all of the elements you may drive through including dirt, water, sand, road salts, etc. Always looking to make good things even better, ICON engineers took the uniball cap concept featured in our Billet Upper Control Arms and arrived at the easy-to-install and affordable solution that is the ICON Uniball Cover Cap Kit. These 6061 billet aluminum caps were designed exclusively for ICON tubular upper control arms and feature extremely durable 3M™ neoprene adhesive rings that attach them to the uniball cup. While our caps don’t make our arms invincible to normal wear, they do a great job of extending the service life of the uniball by keeping the elements out that are usually attributed to premature PTFE-liner failure. The kit includes one pair of caps and two pairs of adhesive rings so that uniballs may be serviced regularly. Whether you are an avid off-roader looking to keep your vehicle in top working order, or you just want to increase the cosmetics of your inner fender well, this is the perfect add-on for you.

Key Features:

• Protection from collecting dust, mud, & road grime on top of uniball which can damage the PTFE liner

• 6061 CNC machined billet aluminum

• Black anodized with laser etched ICON shield logo

• 3M™ neoprene adhesive rings

Tech Info:

• These Uniball Cover Caps were designed to work exclusively with ICON Vehicle Dynamics tubular upper control arms

• Cover Caps will not quiet any existing squeaks coming from uniballs and will not make them resistant to normal wear

System Components Included:

• (Qty - 2) ICON tubular UCA uniball cover caps

• (Qty - 4) 3M™ neoprene adhesive rings

• (Qty - 2) Alcohol wipes

• Installation instructions

Options:

191012       ICON Uniball cap adhesive ring service kit

Our Price: $41.95
Icon Vehicle Dynamics 191009 - ICON Shock Wraps Neoprene Coil Over Shock Protection Covers (large)

ICON Shock Wraps - Neoprene Coil Over Shock Protection Covers (Qty 2)

Overview:

ICON Shock Wraps are a must have for vehicles that see Extreme Weather Conditions or Dirty / Muddy Off-Roading more often then not. These neoprene coil over shock protection covers offer an added layer of resistance keeping dirt, mud, grime, snow, harsh road salts / spray's, and rocks from getting to the shock shafts or seals. This added layer of protection helps prevent damage like shaft pitting & cut seals that require you to have your shocks rebuilt prematurely. ICON Shock Wraps velcro on in seconds, and have a nice form fit with elastic banded ends to give you the most protection possible.



Key Features:

• Added Protection for Coils Springs, Shock Shafts, Shaft Seals

• Can be installed or removed in seconds with out removing shocks from the vehicle

• Additional layer of protection from rocks, road elements and more

• Covers from upper coil adjuster nut down to lower spring perch

• Features the ICON Shield logo

• Made in the USA



Tech Info:

• We recommend a thorough cleaning of shock and covers when heavily covered in road grime or dirt / mud

• Small size fits coil overs that measure between 11.25" - 12.25" from the coil adjuster nut to the lower spring perch

• Small size fits the following 0-3" lift ICON Front coil over shock models:

 - Toyota Tacoma / 4Runner / FJ Cruiser (All Years)

 - Toyota Tundra  (00-06)

 - Toyota Land Cruiser (08 +)

 - Nissan Frontier / Pathfinder / Xterra / Titan (All Years)



Kit Includes:

• (Qty 2)  ICON Shock Wraps - Small (fits coil overs that measure between 11.25" - 12.25" from the coil adjuster nut to the lower spring perch)

• Installation instructions

• ICON Sticker

Our Price: $68.20
Icon Vehicle Dynamics ICON 2.0 Aluminum Series Shock Reservoir Clamp Kit - 2.0 to 2.0

Overview:

ICON Vehicle Dynamics 2.0 Aluminum Shock Reservoir Clamp Kit - 2.0 to 2.0. These precision CNC machined 6061 billet aluminum shock clamps come standard with a polished then anodized finish to give them a nice gloss black finish. This is a great upgrade for your ICON V.S. 2.0 Aluminum Series Reservior shocks over the standard hose clamp.



Key Features:

• 6061 Billet Aluminum

• Precision CNC Machined

• Polished & Anodized for superior corosion resistance

• Stainless hardware

• Laser etched ICON logo



Tech Info:

• Each Kit includes 2 complete shock clamps with hardware.

• We recommend 1 Billet Shock Clamp Kit per remote reservoir shock

• Works with 2.0 series shocks with 2.0 reservoir or 2" diameter tube.

Our Price: $79.95
Icon Vehicle Dynamics 2007 - Current Toyota Tundra Billet Aluminum Shift Knob

Overview:

This shift knob is machined from 6061 Aluminum. It comes with everything you need to replace your factory shift knob and can be installed in seconds. The shift knob comes complete the shift indicator and an adhesive round.

Our Price: $89.24
Icon Vehicle Dynamics 56506 - 2007 - Current Toyota Tundra 0-1.5" Lift Rear Shocks - 2.0 Aluminum Series

Overview:

ICON's Monotube series shocks are great for any purpose. On or off-road these shocks will give you the best performance and ride quality. They are also backed by ICON's Life-time Warranty. These are the last shocks you will ever have to buy for your '07-up Tundra.

Sold INDIVIDUALLY!!!

Our Price: $159.95
Icon Vehicle Dynamics 2007 - Current Tundra 1.5" Lift Rear Leaf Spring Expansion Pack

Overview

ICON Vehicle Dynamics 2007 - Current Toyota Tundra 1.5" lift Rear Leaf Spring Expansion Pack. Unlike traditional "add-a-leafs" that obtain lift height at the cost of stiffening spring rate and sacrificing ride quality. This new approach, full length Toyota Tundra leaf spring expansion pack, replaces all the factory secondary leafs while retaining the factory main and overload springs. This allows us to modify the spring rate to increase ride comfort, obtain lift height, maintain load and towing capacities, and increase wheel travel. By retaining the factory main leaf installation is a snap.



Key Features:

• Improved Ride Quality

• 1.5" Rear lift Height

• Maintains Factory Load & Towing Capacities

• Increased Wheel Travel

• Easy Installation



Tech Info:

• Fits 2wd & 4wd Applications

• Actual lift heights may have a slight variance based on year, make, and model. You may find some trucks get additional lift height.

Our Price: $274.95
Icon Vehicle Dynamics 57620 - 2007 - Current Tundra 2.5" Smooth Body 0-1.5" Lift Rear Shock

Overview:

These 2.5" Diameter Smooth Body Shocks are a great way to add more performance and a much better ride quality to your rear suspension. These shocks are specifically valved to give the '07 to Current Tundra and are fine are tuned for better performance than our standard 2.0 Mono-tube Shocks.

These Shocks are sold INDIVIDUALLY.

Our Price: $329.95
Icon Vehicle Dynamics 57720 - 2007 - Current Tundra 2.5" Piggy Back Reservoir 0-1.5" Lift Rear Shock

Overview:

These 2.5" Diameter Piggyback Manifold Shocks are a great way to add more performance and a much better ride quality to your rear suspension. These shocks are specifically valved to give the '07 to Current Tundra and are fine are tuned for better performance than our standard 2.0 Mono-tube Shocks.

These Shocks are sold INDIVIDUALLY.

Technical Specs:

   Low Profile Billet Top Cap
   Stem Top Design for O.E. Fitment and Optimum Wheel Travel
   ICON Vehicle Dynamics "Bump Zone" For an Addtional 20% Increase in Compression and Rebound the last two inches of Travel
   Billet Aluminum Swivel Manifold Design Allows for Optimum Reservoir Positioning for Tire and Suspension Clearance
   Reservoir Eliminates Shock Fade and Increases Wheel Travel
   Lifetime guarantee that coil springs won’t sag
   Two Stage Disogrin Seals for Pro Longed Lifespan and Maximum Durability
   Durable Spherical Bearings Eliminate Unwanted Deflection
   7/8" NitroSteel Shaft prevents pitting and rust better than any chrome shaft
   100%Bolt-on system - no drilling,cutting or welding necessary for install
   Made in the USA

Our Price: $489.95
Icon Vehicle Dynamics 58460 - 2007 - Current Toyota Tundra Tubular Uniball Upper Control Arm System

Overview

ICON Vehicle Dynamics Tubular Uniball Upper Control Arm System for the 2007+ Toyota Tundra was ultimately designed to add strength and castor on lifted applications or when used in conjuction with adjustable coil over shocks. Weak OEM ball joints present problems by limiting suspension travel potential, especially when using our 2.5” VS Series performance coil-over shocks on your truck. Our ICON tubular uniball upper control arms use 1” Teflon Lined Uniballs combined with a unique 17-4 Stainless Adapter system that increases the upper arms misalignment, increasing strength, allowing for smooth and clean wheel travel without worrying about factory ball joint bind or breakage. The ICON designed unique mounting adapter is an industry first making installation times much faster than other manufactureres arms.

These ICON engineered arms are built not only for added strength, but also to correct alignment geometry on lifted applications. When using adjustable height coil overs or when lift kits angle the control arms at a downward angle the Tundra tends to need more castor adjustment for proper front end alignment. Our engeering built into these arms will help keep the front end aligned in the middle of the factory specs insureing good clean tire wear instead of riding the "barely aligned" specs likely to cause excessive wear on the edge of your tires. Tubular Uniball Upper Control Arms combined with a set of ICON 2.5" Series Coil Over Shocks - 58650 will give you the maximum on or off road performance available to you. ICON Vehicle Dynamics Tubular Uniball Upper Control Arm System is 100% made in the USA using high quality materials with precision manufacturing process's.


Key Features:

•1026 Thick Wall DOM Seamless Tubing

•CNC Bent Tubing

•CNC Machined Bushing Housings and Sleeves

•4130 CNC Machined Uni-ball Cup

•17-4 High Grade Stainless Steel Uni-ball Adapter System

•High Precision CNC Machined Pin Provides OEM Like Fitment

•Professionally Precision Welded



Tech Info:

Fits 2wd & 4wd Applications

Will not work on a stock (non lifted) vehicle

Does not work in conjuction with Fabtech lift kits


Wheel & Tire Fitment Info:

Factory Wheels & Tires:   Yes

Aftermarket Wheels & Tires:  17" or larger wheels with max 5" back space

Our Price: $749.95
Icon Vehicle Dynamics 59920 - 2007 - Current Tundra 2.5" Omega Series Bypass 0-1.5" Lift Rear Shock

Overview:

Stemming from years of suspension design, engineering and racing comes the most revolutionary advancement in shock technology since Claude Foster invented them in 1907. The Omega Series of OE replacement bypass shocks for the 2007 and up Tundra are designed and valved specifically for the rear of your vehicle from stock to 3" of lift. Adjustments to both rebound and compression can easily be made by hand with no tools required. These shocks not only offer the industry leading technology but, incredible ride quality and performance. These shocks are sold separately

Technical Specs:

   Modular and expandable clockable components
   Radial flow technology
   Dynamic heat transfer system
   High resolution adjustability
   More travel in compact design
   Incremental dentented tuning
   Multiple zone position sensitive
   Fully rebuildable & Serviceable
   Heat dissipating billet
   100% Made in the USA

Our Price: $899.95
Icon Vehicle Dynamics 2007 - Current Tundra Billet Aluminum Uniball Upper Control Arm System

Overview:

We are proud to announce the release of the Billet Aluminum Upper Control Arm System for the 2007 - Current Toyota Tundra’s. These control arms will enhance the handling and articulation of the Tundra’s Suspension. They are constructed of 6061 Aluminum and C.N.C. Machined for precise suspension geometry. The Teflon Lined Uniball Bearings installed in the arms articulate much more than the stock ball joint and are much more durable. Instead of the normal polyurethane bushings found on most aftermarket controls arms, Teflon Lined Rod Ends are used, for smoother, quieter operation that insures minimal deflection for accurate and stable handling.

Technical Specs:

   100% Made in the U.S.A
   6061 Aluminum Construction
   On Truck Adjustability for Improved Caster and Camber
   Spherical Rod Ends
   Recessed Uniball with Low Profile High Misalignment Spacers
   17-4 Heat Treated Stainless Steel Taper Adapter
   Uniball Dust Cover to Prevent Premature Wear
   100%Bolt-on system - no drilling,cutting or welding necessary for install

Our Price: $1,254.95
Icon Vehicle Dynamics 2007 - Current Tundra Front Coil-over Shock Kit

Overview:

These adjustable coil-over shocks have proven their strength and longevity for years on end and they keep going. These shocks offer the best ride quality and handling. These shocks add 2" of additional wheel travel and dramatically increase the capabilities of your 07-08 Tundra's front suspension. These coil-over’s come complete with all the hardware necessary to complete the installation. Recommended tire size 305/60R18, wheel 18X9 with 5" back spacing.

Technical Specs:

   Adjustable ride height from 0" - 3.5"
   Race shock piston with flutter stack compression valving
   Cad-plated threaded body / Extreme Weather Plating Option Available
   Billet aluminum upper mount
   PTFE-lined spherical bearing
   Completely re-buildable
   2.5" shock diameter to prevent overheating
   Chrome-silicon spring
   250 PSI nitrogen-charged internal reservoir
   100% Made in the USA
   Nitro-steel shaft will not chip or rust like chrome shafts

Our Price: $1,299.95
Icon Vehicle Dynamics 2007 - Current Tundra Remote Reservoir Front Coil-over Shock Kit

Overview:
ICON Vehicle Dynamics has taken their already perfect performing coil-over shocks and given it the heat dissipation and long lasting performance of a full blown race shock. All of this has been developed to bolt on and install with ease. They increase suspension travel and dramatically increase the capabilities of your Tundra's front suspension. These coil-over’s come complete with all the hardware necessary to complete the installation. Recommended tire size 305/60R18, wheel 18X9 with 5" back spacing.

Technical Specs:

   Adjustable ride height from 0" - 3"
   Race shock piston with flutter stack compression valving
   Kit also Includes Reservoir Mounting Brackets
   Cad-plated threaded body / Extreme Weather Plating Option Available
   Billet aluminum upper mount
   5/8" PTFE-lined spherical bearing
   Completely re-buildable
   Hose Length Optimized for Increased Fluid Transfer
   Mounting Bracket Orients Reservoir for Optimum Tire Clearance
   External Reservoir Ensures Maximum Cooling
   Chrome-silicon spring
   250 PSI nitrogen-charged internal reservoir
   Nitro-steel shaft will not chip or rust like chrome shafts
   100% Made in the USA

Our Price: $1,599.95