Home > Suspension > Jeep > Jeep Wrangler TJ (1997-2006) > Savvy Off Road
Sort By:
Page of 1
Savvy TJ/LJ/XJ/MJ FRONT UPPER JOHNNY JOINT CONTROL ARMS Savvy TJ/LJ/XJ/MJ FRONT UPPER JOHNNY JOINT CONTROL ARMS

For 1997-2006 Jeep TJ's and Unlimiteds, as well as all years of XJ's and MJ's. The Johnny Joint® front upper control arms are fully adjustable so that you are able to adjust your pinion angle and caster angle after a lift is installed. The arms are fabricated out of 1.25" 6061-T651 HD aluminum rod and feature the Johnny Joint® on the frame end of the arms.  No need to remove a bolt to adjust your pinion angle.  The  opposite end connects to the stock bushing on the front end housing - or you can replace these stock front end bushings with our CE-9102K Johnny Joint® front end housing conversion kit. Sold as a pair.

WRENCH FLATS ARE NO LONGER INCLUDED!

Our Price: $275.00
Savvy/Currie Aluminum Adjustable Rear Upper Control Arms TJ/LJ Savvy/Currie Aluminum Adjustable Rear Upper Control Arms TJ/LJ

TJ/LJ REAR UPPER JOHNNY JOINT® CONTROL ARMS For 1997-2006 Jeep TJ's and Unlimited's. The Johnny Joint® rear upper control arms are fully adjustable with thread Johnny Joints on both ends so that you are able to adjust your pinion angle after a lift is installed. The arms are fabricated out of 1.25" 6061-T651 Aluminum rod and feature the Johnny Joint® on both ends of the arms. The arms are 6061-T651 Aluminum drilled and tapped to accomdate the Johnny Joint. Wrench flats are no longer included (they cause more problems.) Sold as a pair.

These come with a Lifetime Warranty. Defined as should they fail or break in normal driving condition or off road activities we will replace them. Loose joints is not a failure but will cause them to fail. So make sure the joints are tight at all times.

WARNING! THESE MUST BE CHECKED TO INSURE THE JOINTS ARE TIGHT WHEN INSTALLED. PERIODIC INSPECTION IS REQUIRED. LOOSE JOINTS CAN CAUSE THE LINKS TO FAIL RISKING INJURY OR DEATH!

Our Price: $285.00
Savvy/Currie Aluminum Adjustable Lower Control Arms TJ/LJ Savvy/Currie Aluminum Adjustable Lower Control Arms TJ/LJ

TJ/LJ LOWER JOHNNY JOINT® CONTROL ARMS For 1997-2006 Jeep TJ's and Unlimited's. The Johnny Joint® lower control arms are fully adjustable with thread Johnny Joints on both ends so that you are able to adjust your pinion angle after a lift is installed. The arms are fabricated out of 1.5" 7075 Aluminum rod and feature the Johnny Joint® on both ends of the arms. The arms are 7075 Aluminum drilled and tapped to accomodate the Johnny Joint. Sold as a pair and INCLUDES greasable bolts.

The ARMS come with a Lifetime Warranty. Defined as should they fail or break in normal driving condition or off road activities we will replace them. Loose joints is not a failure but will cause them to fail. So make sure the joints are tight at all times. CURRIE WARRANTY ON THE JJS.

WARNING! THESE MUST BE CHECKED TO INSURE THE JOINTS ARE TIGHT WHEN INSTALLED. PERIODIC INSPECTION IS REQUIRED. LOOSE JOINTS CAN CAUSE THE LINKS TO FAIL RISKING INJURY OR DEATH!

Our Price: $320.00
SAVVY TJ/LJ JOHNNY JOINT ALUMINUM CONTROL ARM SET - 8 PIECES SAVVY TJ/LJ JOHNNY JOINT ALUMINUM CONTROL ARM SET - 8 PIECES

For 1997-2006 Jeep TJ's and LJ's. This is the complete set of 8 Johnny Joint® Control Arms. All arms are fully adjustable allowing the pinion angle and caster angle to be adjusted. This adjustable feature allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. The lower arms are made of 1.5" Aluminum and the upper arms of 1.25" 6061 Aluminum rod drilled and tapped both ends with a wrench flat. All arms are raw aluminum and come with Johnny Joints with zerk fitted grade 8 mounting bolts. The uppers are double adjustable so you don't have to remove a bolt to dial in the pinion angles.

To allow complete unrestricted movement, the Johnny Joint® is used at both ends of all 4 of the rear arms, both ends of the front lowers, and on one end of the front upper arms. Also see our CE-9102K Johnny Joint® housing kit for installing Johnny Joints® on the front end housing.


Our Price: $1,149.00