2007 - 2018 Jeep JK - 0 - 3" Adjustable Rear Coilover Conversion System


Usually Ships in 12-15 Weeks

Regular price $2,204.84 Sale price $2,094.59 Save $110.25

0 in stock


Available as an industry first is the ICON Jeep JK 0 – 3” bolt-on and returnable to stock rear coilover conversion system. This system not only offers superior ride quality and performance, but gives you the option to adjust ride height based on how your vehicle is equipped. Included in this rear system is a fabricated coilover upper subframe & lower axle mounts, 2.0 V.S. Series remote reservoir coilovers, reservoir mount, and necessary hardware for proper installation. This ICON system was designed from the ground up for improved suspension handling off road, increased wheel travel over stock, and the best ride quality on the market. ICON 2.0 V.S. Series shocks include FK bearings, billet top cap & rod ends, 7/8" shafts, all while increasing the duration of consistent damping over stock regardless of situation. Adjustable ride height, optional compression damping control valve, and secondary spring rate engagement adjustability by the end user makes this kit highly tunable to your personal liking by all skill levels.

Key Features:

• 100% Returnable to stock

• Adjustable ride height

• Adjustable secondary spring rate engagement

• Increased wheel travel over stock

• Vehicle specific tuned shocks for superior performance

• Shock geometry improves stability

• One piece upper subframe for maximum strength

• 100% Made in the USA

• Lifetime guarantee that coil springs won’t sag

Tech Info:

• Fits 2007 - Current Jeep JK Models

• Adjusting kit over 3” will require an adjustable track bar and aftermarket link arms (see options below)

• Requires aftermarket exhaust that dumps before the rear axle

• No driveline modifications necessary if kit is installed as intended (with or without track bars)

• Wheel alignment recommended

Wheel & Tire Fitment Info:

OEM Wheels & Tires: Yes

Aftermarket Wheels: 4.5" Backspace

(wheel spacers required to run factory wheels with an oversized tire)

Aftermarket Tires: 33” Tall tires.

(35" tire packages require aftermarket high clearance fenders & minor modifications, test fitment recommended)

System Components Included:

• Rear coilover upper & lower mounts, reservoir mount

• Qty (2) ICON 2.0 V.S. Series rear coilover shocks with reservoir

• Necessary Hardware

• Installation Instructions


22003 Jeep JK Coilover Conversion Front

22019 Jeep JK Front Hydraulic Bumpstop System

21020 Jeep JK Front Adjustable Pan Rod Bar Kit

21025 Jeep JK Rear Adjustable Pan Rod Bar Kit

21031 Jeep JK Front Lower Adjustable Link Kit

21036 Jeep JK Front Upper Adjustable Link Kit

21041 Jeep JK Rear Lower Adjustable Link Kit

21046 Jeep JK Rear Upper Adjustable Link Kit

22012 Jeep JK Alignment Cam and Knock out Tool Kit

22013 Jeep JK Alignment Cam Kit (Fits in Front Lower or Rear Upper Link Position)

22014 Jeep JK Replacement Front Drive Shaft (2012+)

22016 Jeep JK Replacement Front Drive Shaft (07-11)

22017 Jeep JK Caster Punch Tool Only