The Carli Ram Eventure system is the most advanced suspension system ever developed for HD Ram trucks. With shocks that sense terrain and adapt 100s of times per second to be as smooth as possible, it offers unmatched ride and control both on and off road. The system is backed up by all the supporting parts normally left out by cheaper "lift kits" including a Carli track bar, radius arm drops, rear sway bar end links a rear track bar drop and more. You can also upgrade things further with the addition of a steering stabilizer, sway bar, and fabricated radius arms. Please note this is a DIESEL Cummins 2500 COIL ONLY system. It will not function on air 2500 or 3500 trucks, and is not tuned for Hemi applications.
HOW THE EVENTURE SYSTEM WORKS:
The core of this system is the Carli Eventure shock package, co developed with SDI. The shocks themselves are top-tier construction. Hard-anodized aluminum bodies and reservoirs pair with 17-4 Stainless Shock Shafts will stand the test of time and elements. Billet Rod ends house teflon lined bearings to ensure industry leading performance and longevity. The “Brain” of the system is the ECU (Electronic Control Unit). The ECU Harness uses a large OEM-style connector with a rocker linkage to ensure it remains secured once fastened. We played with a few mounting locations in our R&D and the heat-cycling of our initial under-hood location proved detrimental to the ECU’s operable temperature range. We redesigned the harness to accommodate an in-cab mounting location (under the driver’s seat) and have had no overheating activity since.
Via the communication harness, the ECU accesses data from the engine mounted IMU (Inertial Measurement Unit). This unit senses any change in pitch/roll of the vehicle. The data from this IMU combines with information gathered from the OBDII port (Brake Pressure, RPM, Steering Angle, Throttle, etc.) to anticipate changes in chassis movement. Subsequently, it firms and softens the shocks where necessary to maintain a chassis that’s as level as possible.
The most important part of the interface is the one with which you interact. SDI put in a TON of work here to ensure a user-friendly interface with clean integration. We worked with them to take it a step further. The Bracket and Touch Screen mount in place of the bottom grab-handle bolt cover placing the touch screen both visible and out of the way. We provide a longer bolt to secure the screen. This location allows for clean routing of the wiring harness that feeds the Touch Screen without the need to trim the grab handle or weather-stripping.
DRIVING MODES:
Carli worked with SDI to refine the drive modes; we wanted to increase the seat-of-the pants change between each mode. Offered on the E-Venture System are Mountain (Rock-Crawl), Street and Desert Modes. This is in order from softest/least sensitive to most controlled/active. These modes have been EXTENSIVELY refined; there’s nothing standard about them. All you, as the customer, need to do is select the mode and the system will activate the profile instantaneously. Within each of the above modes, users can refine the ride to their taste and it will auto-save the profile. There are adjustments for the front and rear shocks independently to increase control or comfort within each of the drive modes. We tuned and refined our recommended settings to be centered on ALL drive modes but that doesn’t mean you won’t prefer to run the front in the center of the adjustment and rear all the way toward comfort. Point is, it’s completely up to you! Pro Mode allows users to adjust the Pitch, Roll, Brake, Throttle and Steering Response. Don’t worry, if your curiosity gets ahead of your knowledge or you failed to track your changes, we’ve implemented a “Restore Default” setting.
Arguably the most handy feature for our customers is the Rear Load Adjustment. This gives the user incremental control over the rear dampers. When loaded, the rear can be adjusted to find the balance of comfort and support OR, as we preferred, max the rear support to prioritize load support. This adjustment makes a huge difference in the rear control when loaded; this will likely be the most championed feature.
This system fits Dodge Ram 2500 4x4 trucks from 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and 2023 with factory rear coil springs.
This system will fit 35s with no trimming on a 0 to +27 offset wheel that is no wider than 9." To fit 37s on a Ram truck we recommend a +18 to +27 offset wheel that is no wider than 9,” as well as some mild trimming of the plastic fender liner and maybe pinch weld depending on the tire.
INCLUDES
-Carli 2014+ Ram 2500 EVenture 2.5 Shock Package
-Carli Front Linear Rate 2014+ Ram 2500 Coil Springs
-Carli Rear Multi Rate 2014+ Ram 2500 Coil Springs
-Carli 2014+ Ram 2500 Adjustable Track Bar
-Carli 2014+ Ram 2500 Rear Track Bar Drop Bracket
-Carli 2014+ Ram 2500 Radius Arm Drop Brackets
-Carli Front Bump Stop Drops
-Carli 2014+ Ram 2500 Rear Sway Bar End Links
OPTIONAL
-Carli Front Billet Sway Bar Drop Brackets
-Carli 2014+ Ram 2500 Torsion Sway Bar
-Carli Ram Fabricated Radius Arms
SPECIFICATIONS
-3" Front Lift
-1" Rear Lift
-Level Ride Height
-Unparalleled ride quality
-Incredible off road performance
-All inclusive system - no suspension upgrades required
-Most geometrically sound system on the market
-Linear travel
-Coils have proper forces applied due to radius arm drop brackets
-Rear coil suspension "wag" is minimized
FITMENT GUIDE
Year Model Part Number
2014-23 DODGE RAM 2500 4x4 Diesel CS-DPT25-1419-D
Installation Instructions
| Front Lift | Rear Lift | Front Travel | Rear Travel | Shock Diameter | Tire Fitment |
|---|---|---|---|---|---|
| 3.25″ | 1″ | 9.3″ | 11″ | 2.5″ | 35" / 37" |
Customer Reviews
Customer Reviews
I ordered the Carli gamut from CJC for my RAM: E-Venture system, sway bar, diff guard, and lower steering stabilizer; plus a set of 17" Racelines to mount 37" Nitto Ridge Grapplers. Answers to my questions via email were quickly responded to. I placed my order on a Monday, and had a pallet delivered Wednesday. (I am in Southern CA.) The pallet was packed well, and arrived undamaged. All of the Carli parts were packaged in heavy duty/high quality boxes, bags, and foam. Instructions were detailed, and even though a few items were missing pages or instructions entirely, they were available on the Carli website. I contacted Carli with one technical installation question, and the rep there was super knowledgeable and professional.
I opted to self install, and working on jack stands wasn't ideal, but doable. You will be drilling 1/2 and 3/4 inch holes in parts of the chassis, and need a right angle drill or adapter. Not ever needing a true right angle drill, I opted to try a Harbor Freight angle adapter for $20. It worked great for the rear track bar, front suspension drop brackets, and front bump stop mounts.
I have only had the full setup installed for a week, and initial on road driving impressions are great over stock. Between the spring rates, sway bar, and tire sidewall/pressures, it feels super confident. Does it ride softer? Not particularly. Does it ride better? 100%. Freeway off ramps and winding back roads feel like I'm in my BMW X5. So far this system shines over drainage dips and speed bumps. In stock form, dips and bumps were jarring and very pronounced. Now I can clip them with little fan fare.
I have yet to get off road. I will be towing my Weekend Warrior to Sand Hollow in Utah soon, which is about 450 miles for me. I have Liftmaster airbags for the tow, and will be removing them for Sand Hollow. I feel a Youtube review will follow once I have experienced the system in all of its elements. If you are on the fence, I'd say pull the trigger on this setup. It is spendy for sure, but the quality of parts and fit and finish are OE or better.
