Air Bags for heavy duty applications such as Carli Suspension, Firestone Ride Rite, and Daystar Air Bag Cradles.
22 products
We want our trucks to do everything. Hit the trails, tow the boat to the river, take us to work and transport the family on long road trips. Adding an air bag system to your full-size truck or SUV has always meant scratching at least one of those off your list. With most air bag systems, the lower air bag mount is placed above the leaf spring significantly reducing wheel travel by design. Your air bag system should compliment your truck, not inhibit its ability. Daystar’s new Air Bag Cradle* (Patent Pending) mounts to your trucks lower suspension providing more room for the air bag to safely cycle with no loss of overall wheel travel. Inferior lower air bag mounts restrict air bag movement using inadequate space, which can lead to unexpected damage to the air bag. Made from extremely tough Daystar Polyurethane, the Air Bag Cradle allows for full suspension travel, while still allowing the full benefits of your air bag system. The Air Bag Cradle fits most full-size pick up trucks, and SUV’s running 6-inch diameter air bags and are made in the USA.
Double Bellow Airbags are restrictive to ride quality and travel of the rear suspension; Enter Carli Long Travel Airbags. We combine tapered billet pistons and rolling sleeve design to maximize the travel and ride quality by minimizing the exponential spring rate increase associated with aftermarket airbags. The airbags are rated to 2,000lbs. each at 100psi with a normal operating range of 5-75psi while supporting up to 12 inches of suspension travel.
The extended and collapsed dimension combined with ride height piston-depth makes these airbags compatible ONLY with our 4.5″ Lifts, unfortunately. Everything is included to set these up for manual fill but we provide industry standard 1/4″ airline to plumb these into your existing air system if desired. As can be seen below, we offer these for all three axle diameters on the 2017+ Super Duty Platform.
Installation Instructions
Need a compressor? Click here.
Looking to supplement the load capacity of your truck? This airbag system will work on either a factory Ford F-250/F-350 or a Carli equipped Ford to give you the best of both worlds. If you are running these bags with a Carli rear leaf pack, the Daystar cradles are required to maintain droop travel and articulation.
This airbag system will allow full towing and payload capacity even with a Carli full replacement leaf pack set up.
Firestone air spring systems are designed to maximize safe load carrying capacity, stability, and overall ride quality. They are designed and assembled in the USA. Ride Rite air springs use the same Firestone technology used on many heavy duty trucks, trailers, and buses on the road today. Ride-Rite air helper springs utilize a pair of convoluted air springs, which can be adjusted for changing loads. These air springs are capable of 3,200 to 5,000 lbs. of load leveling capacity. Please remember that air springs do not increase the load carrying capacity of your vehicle beyond factory specs.
Carli Suspension's Long Travel Air Bags combine off Road performance with increased load capacity and towing capability for your truck. Constructed out of 1/4 inch plate steel.
This system allows full axle articulation when aired out. Carli is proud to provide their customers with a solution that allows the best of both worlds. You can now tow and haul more, ride level at any weight range and still go play in the dirt.
DODGE RAM FITMENT GUIDE
-12 - 13 2500 / 3500 4x4 (4.0 inch axle tube) CS-DLTB-12-D
-03 - 11 2500 / 3500 4x4 (4.0 inch axle tube) CS-DLTB-03-D
-03 - 11 2500 / 3500 4x4 (3.5 inch axle tube) CS-DLTB-03-H
SPECIFICATIONS
-Supports up to 12 inches of travel
-Maximum Load Capacity
-.250 Plate Construction
-Perfect for 5th Wheel and Bumper Pull Trailers
-Laser Cut and Powder Coated Brackets
-Must be used with add-a-packs or full leafs
* NOTE: 2012 Dodge Ram 2500/3500 SRW Trucks are equipped with traction control and require PN: CS-LTB-12-D. Some 2011's were equipped with traction control but we have yet to see a any dually with traction control. If you have a 2011 2500/3500 single rear wheel or 2012 dually, please check to see if your vehicle is traction control equipped prior to ordering. If TC equipped, order: PN: CS-LTB-12-D; if not please order: CS-LTB-D
** 1994-2002 application models were designed around 3.5" axle tube trucks. This part number requires the installer to perform additional fabrication on most trucks.
Installation Instructions
Timbren bump stops are our go to solution for towing on stock or modified Ram 2500 rear suspension. These bump stops blot in place of the factory bump stop in about 5 minutes, and can be removed in the same time for a smooth unloaded ride. Airbags are expensive, complicated and take away from the unloaded ride. Timbrens allow you to install a towing solution when you need it, and easily remove it when you don’t! Timbrens will allow for full factory towing even on a Carli or Thuren equipped truck.
Suspension Enhancement System;
Weight Capacity 6000 lbs.;
Rear Axle;
Product Features
Eliminate Suspension Sag And Cushion Road Shock
Reduce Sway And Improve Roll Stability
Easy To Install With Basic Hand Tools
Improves Roll Control Trouble And Maintenance Free
Satisfaction Guarantee And Lifetime Warranty
Leader In The Snow Plow Industry Leaders In Rubber Spring Technology Since 1965
Increase the load capacity and towing capability of your Super Duty without sacrificing ride quality and comfort. Carli's airbags work with up to 12" of suspension travel and are 100% bolt-on DIY. You can install onboard air or use them manually. These are heavy-duty and rated up to 100 psi with a normal operating range of 5 to 75 psi, suitable for big 5th wheels, work trucks, campers, boats, bumper pull trailers and hauling.
SPECIFICATIONS
-12" travel
-100 psi rating
-DIY bolt-on
-Use manually or with onboard air
*CS-FLTB-11 will only fit 2005-2016 SuperDuties with the 3.5" axle tube.
**Ford Super Duty Long travel airbags will ONLY work with 2" of rear lift on an F350 or 3" on an F250 (i.e. trucks with Carli 4.5" kits equipped)! These cannot be used on a stock height truck!
Installation Instructions (2005-2007)
Installation Instructions (2008-2016)
SPECIFICATIONS
-12" travel
-100 psi rating
-DIY bolt-on
-Use manually or with onboard air
*CS-FLTB-11 will only fit 2005-2016 SuperDuties with the 3.5" axle tube.
**Ford Super Duty Long travel airbags will ONLY work with 2" of rear lift on an F350 or 3" on an F250 (i.e. trucks with Carli 4.5" kits equipped)! These cannot be used on a stock height truck!
Installation Instructions (2005-2007)
Installation Instructions (2008-2016)
This airbag system allows you to supplement the load capacity of your 2014+ Ram 2500 truck. If you're tired of squat when loaded or towing, this is the solution. We highly recommend the addition of Daystar Airbag cradles in an attempt to maintain the best ride quality and suspension flex possible with airbags.
Timbren bump stops are our go to solution for towing on stock or modified Ram 2500 rear suspension. These bump stops blot in place of the factory bump stop in about 5 minutes, and can be removed in the same time for a smooth unloaded ride. Airbags are expensive, complicated and take away from the unloaded ride. Timbrens allow you to install a towing solution when you need it, and easily remove it when you don’t! Timbrens will allow for full factory towing even on a Carli or Thuren equipped truck.
Suspension Enhancement System;
Weight Capacity 6000 lbs.;
Rear Axle;
Product Features
Eliminate Suspension Sag And Cushion Road Shock
Reduce Sway And Improve Roll Stability
Easy To Install With Basic Hand Tools
Improves Roll Control Trouble And Maintenance Free
Satisfaction Guarantee And Lifetime Warranty
Leader In The Snow Plow Industry Leaders In Rubber Spring Technology Since 1965
