The UltraSwing hitch carrier combines a spare tire carrier and swing-away receiver for bike racks or other hitch-mounted accessories. The UltraSwing Mega-Fit maintains all the features and accessory options of the other UltraSwing versions in a fitment designed for full-size trucks, Sprinter, Transit and Promaster vans, and other large-format vehicles. This carrier fits 2" and 2.5" hitches.
Pricing INCLUDES the RIGd 2.5" hitch adapter.
This product ships with an 8 lug wheel plate that fits the following bolt patterns: 8-LUG (8X6.5, 8X170, 8X180, 6X5.5, 5X135, 5X160, 5X5, 5X5.5).
If you need a different plate, please order directly from RIGd.
-Patent Pending Dual Hitch System
-Hitch-mounted (Hitch pin not included)
-Rock-solid anti-wobble design (click here for proof)
-Tire and bikes swing out to access the rear of the vehicle
-Adjustable/removable wheel plate carries tires up to 40-inches
-Supports a combined weight of 250lbs
-Multiple mounting options for hitch accessories
-Tow rated lower receiver (10,000 lbs/1,000 lb tongue)
-Weighs 65 lbs with wheel plate
-Black powder coat finish
-Integrated license plate relocation mount
-Proudly made in USA
The UltraSwing Mega-Fit is compatible with all UltraSwing Multi-Fit accessories, including the UltraPlate, Camp Table, Rotopax Mount.
Note: If mounting a tire and bike rack you will need a hitch extension.
Click here for the install guide.
RIGd UltraSwing Hitch Carrier Mega-Fit
Carli Suspension created the 2017+ Ford trophy hitch to solve the problem of fitting a full size spare. This 3/16″ and 1/4″ cold-rolled American steel hitch frame is combined with a 3-way tie down to provide users a 3″ Hitch Receiver and fitment for up to a 38″ spare tire in the factory location. This until is direct bolt-in for 2017, 2018, 2019, 2020, 2021 and 2022+ Ford F-250 and F-350 trucks, and was tested to 16,000lbs with no notable deflection giving it over a class 5 rating. This hitch does require modifying the exhaust to exit directly after the over axle segment to fit a 38" tire, but with a 37" tire the factory exhaust will clear. Please see photo above for an example of the modification for 38s.
This is a long awaited product, and due to the intensive production process will have a lead time. It takes one welder an entire day to produce a hitch, so we anticipate a 3-12 month lead time after initial order.
Everything fit perfectly. Installed by myself, although having an extra couple sets of hands would be very helpful. Getting the two rear bolts that are facing up was by far the most difficult part. Very tight space. Torching the bolts to heat them up is a must. And I would recommend using a ratcheting box wrench if you had one. I couldn’t get a socket up there to turn. My truck had some heat shielding on the exhaust already and I only had 37’s to fit. It was tight but they fit with having to do any exhaust work. Although if you don’t have any heat shield, you will need to add some. Any bigger than 37’s you’ll need to adjust the exhaust.
My 2022 Ford Super Duty 6.7L lugs a bed camper most of the summer. I finally have a full size 37” spare!!! I installed the hitch myself on the driveway by first removing the rear bumper. It took me a day to do the project. Super happy with the end result as the fit and finish are spectacular. This is one of my favorite and most functional mods. I run 37” Wildpeaks ATs and the 2.5/3.5 Carli Pintop and did not modify the exhaust at all. I’m comfortable with the amount of clearance from the muffler.
I have long anticipated this hitch, and have many other Carli products on my truck. Hitch fit as intended and my full size spare (37/13.50-18) fits as intended. However be aware that there is significant modification to the exhaust needed in order for it all to work, beyond what is listed in the instructions. For the price this items commands, it would be nice if it came with a curved elbow of 3.5" exhaust tubing to be welded in place of the stock tip once the cut is made after the resonator. That way the spare tire is not having hot exhaust gas blown on it and eventually causing the integrity of the tire to be compromised or be a fire hazard. Also, my hitch pin did not fit as there was some issues with the support welds around the hitch pin holes, I had to be sent a 5/8 reamer from Carli to drill it out. Lastly, it would have been nice if the hitch pin hole was moved back slightly away from the hitch, like the stock hitch is so that larger locking hitch pins can be used, only about 1/4 - 1/2" is needed.
CJC Off Road installed a new Carli E-Venture Suspension System on my 2022 Ford Tremor F-350 Superduty with 6.7L diesel engine. All I can say is what an amazing upgrade to the OEM Tremor suspension system! Incredible flexibility and amazing capability enhancements. I use my truck on road, towing and off road and this is the best suspension system on the market today, allowing you to dial in on the fly changes to the truck to make it the best tool for the job at hand. Best ride on road, then ability to shift on the fly when towing to make adjustment to front and/or rear shocks to enhance overall performance and ride while towing. From an off road perspective the OEM Tremor suspension is a 10 mph off road suspension - go much over that and you quickly run out of shock travel. With the Carli 3.5" E-Venture System (including new rear spring pack) allows the F-350 Tremor to perform off road on par with a Raptor - simply no comparison to an OEM HD truck suspension. If you want the best system, allowing your truck to excel in all uses and situations, then this is the best system money can buy! CJC is incredibly knowledgeable and a great place to get any needs for your truck addressed if you live in S. Cal!
This is a fully adjustable spare tire carrier that is ready for any adventure! This tire carrier holds 35"-40" tires. Mount it directly to our Icky Concepts Ram Bulkhead panel or Ford Bulkhead Panel in any location you want! This tire carrier is fully adjustable along the bulkhead of your truck without the need to drill more holes. Additionally, it can easily be pulled off if you want to set your truck bed up with different gear.
THIS REQUIRES AN ICKY CONCEPTS BULKHEAD MOLLE PANEL TO MOUNT PROPERLY!
This spare tire carrier consists of a CNC cut and press broken main bracket with a stainless steel nut welded to it. That main bracket mounts to your bulkhead molle panel using stainless steel hardware and a 11ga steel backing plate. This essentially means you are mounting your tire to over a 1/4 inch of steel with the 3 layers of 11ga steel this tire carrier design utilizes. There are two aluminum spacers that allow the side wall of your tire to press against them; this turns the tire into a spring force that keeps the all-thread handle from coming loose while off-roading. Speaking of the all-thread handle, the threaded portion of the handle is 316 stainless steel so you will never have to worry about rust binding up your threads! And finally, the conical wheel puck is made of MDS-filled nylon. This MDS-filled Nylon will not scratch your wheel finish, will not fade or crack in the sun, and will last forever!
If you really plan on boogying, get yourself a rivet nut support system. This system ensures the rivet nuts of your bulkhead molle panel will stay firmly in place when you are really abusing your truck on the trails and rocks!