Filter 4Runner
30 products
Vehicle Application: TACOMA 96-04 and 4RUNNER 96-02
Internal Design: Monotube
Internal Design: Monotube
Shock Absorber Type: Gas Charged
Damping Type: Normal
Adjustment Type: Without Adjustment
Height Adjustment Type: Threaded Spacer
Shock Absorber Outer Diameter: 2.5"
Reservoir: Without External Reservoir
Lightweight Hard Anodized 6063 Aluminum Alloy Reservoirs
Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination.
Internally threaded Top Cap
Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body.
Fittings
High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking.
Shock Cylinders
2.5" Shock cylinders are precision bored to within +/-.001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function.
Truncated Thread Design
Coilover shocks are machined with own truncated thread design for ultimate strength and trouble free spring preload and height adjustments.
Piston
The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality.
Coil Adjuster Nut
Pinch bolt coil adjuster nut offers superior clamping force to retain your coil preload adjustments without crushing the threads like set screw style collars do.
Shaft
Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life.
Wear Bands
Wear bands are made from Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing.
Rod End
High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long lfie with no metal to metal contact.
Mounts
Aluminum components and vehicle specific moutns are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting crackets and hardware along with detailed installation instructions.
Reservoir
Internal reservoir allows easy bolt-on installtion and guards against shock fade during sever use.
Overview
ICON Vehicle Dynamics Tubular Uniball Upper Control Arm System for the 1995.5 - 2004 Toyota Tacoma is a must have to add strenth and performance to your truck while on or off road. Weak OEM ball joints present problems by limiting suspension travel potential, especially when using our 2.5” VS Series performance coil-over shocks on your truck. Our ICON tubular uniball upper control arms use 1” Teflon Lined Uniballs combined with a unique 17-4 Stainless Adapter system that increases the upper arms misalignment, allowing for smooth and clean wheel travel without worrying about factory ball joint bind. The ICON designed unique mounting adapter is an industry first making installation times much faster than other manufactureres arms.
These ICON engineered arms are built not only for added strength, but also to correct alignment geometry on lifted applications. Pair these Tacoma Tubular Upper Control arms with a set of the ICON 2.5" Extended Travel Coil Over Shocks - 58615 to get the maximum performance and suspension travel available to you. ICON Vehicle Dynamics Tubular Uniball Upper Control Arm System is 100% made in the USA with high quality materials with precision manufacturing process's.
Key Features:
•1026 DOM Seamless Tubing
•CNC Bent Tubing
•CNC Machined Bushing Housings and Sleeves
•4130 CNC Machined Uni-ball Cup
•17-4 High Grade Stainless Steel Uni-ball Adapter System
•High Precision CNC Machined Pin Provides OEM Like Fitment
•Professionally Precision Welded
Tech Info:
Fits 2wd & 4wd Applications
Does not fit 5 lug models
Wheel & Tire Fitment Info:
Factory Wheels & Tires: Yes
Aftermarket Wheels & Tires: 16" or larger wheels with max 5" back space