Looking to mount a switch panel on your truck to control your lighting? Check out our SwitchPros and Auxbeam panels and mounts.
9 products
All systems include:
- 100 User-selectable switch legends (not shown)
- Eight user-programmable switches
- Four 35A circuits and four 20A circuits
- Waterproof, Solid State 125A Power Module
- RGB Backlighting provides unlimited color options, using Color Picker on App
- Daisy Chain up to 3 Switch Panels to One Power Module to allow control of your 8 outputs from up to 3 locations on your vehicle
- Switches can be programmed for:
- On/Off or Momentary
- Ignition or Battery Input
- Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation
- Memory Function
- Master Mode, with the ability to turn multiple outputs On AND Off with one-touch
- Automatic Power-Up upon vehicle start-up
- Two External trigger inputs can each activate up to four outputs (Active Hi or Active Low)
- Lighting outputs can dim from 100% to 10%, with the ability to dim during Flash or Strobe patterns
- Sleep Mode for minimal power consumption
- Color-Coded circuit wires
- LED Input Status Indicators for easy troubleshooting
- Time Delay Off function available for all circuits
- Splash-proof switch panel with Polycarbonate overlay faceplate
- Program and control the system from switch panel pad or smartphone
- Bluetooth interface with FREE Apple or Android App
- Battery Voltage Readout on App screen
- No Fuses or Bulky Relay box
- Built-In Bluetooth Module
Switch Panel Specs:
- RGB Backlighting provides unlimited color options, allows for exact matching to factory dash lighting
- Built-In Bezel Style Switch Panel enclosure measures 4” L x 2” W x .375” H ; includes concealed mounting hardware for factory-look installation
- Orange LED switch indicators
- 100 User Selectable Legends
Power Module Specs:
- 8 Outputs: 4 rated @ 35A, 4 rated @ 20A
- 125A maximum rating
- Waterproof and Solid State
- 6”L x 3”W x .5”H (excluding connectors)
- LED Input Status Indicators for easy troubleshooting
- Underhood rated 125° to -40°C
Kit Also Includes:
- 11’ of Communication Cable between Switch Panel and Power Module
- Color-Coded Output wires
- Wire harness with Waterproof, sealed automotive grade connectors
- Power Cable with 125A inline fuse
Switches can be programmed to be: On/Off or Momentary, ignition or battery-powered, flash, strobe, low voltage disconnect, and memorize previous settings. There is also a programming function to adjust the brightness of backlighting and indicator LEDs.
This CJC Built upper dash mount kit is designed to fit the 2019+ Ram 1500, 2500, 3500, and Power Wagon trucks is made from a carbon fiber filament that’s 3D printed for a perfect fit in your factory dash. It was specifically designed to work with the Switch Pros 9100 switch unit to provide a perfect mounting solution for the new Ram trucks using existing hardware on the dash.
We use a filament that's rated to withstand three times the temperature of a standard ABS printed filament and will not crack or deform under heat.
|
This CJC Built upper dash mount kit is designed to fit the 2019+ Ram 1500, 2500, 3500, and Power Wagon trucks is made from a carbon fiber filament that’s 3D printed for a perfect fit in your factory dash. It was specifically designed to work with the Switch Pros 9100 switch unit to provide a perfect mounting solution for the new Ram trucks using existing hardware on the dash.
We use a filament that's rated to withstand three times the temperature of a standard ABS printed filament and will not crack or deform under heat. This package comes with a mount and a Switch Pro 9100 unit |
Our all-new upper dash mount kit designed to fit the 2013-2018 Ram trucks made from a carbon fiber filament 3D printed to bolt in perfectly in the pen tray. It was specifically designed to work with the Switch Pros 9100 switch unit to provide a perfect mounting solution for the 4th generation Ram trucks.
These mounts are precisely printed with a chopped carbon filament. This filament is rated to withstand much higher temperatures than standard PLA printed filament. What this means for you is a part that will last, at least as long as the factory dashboard, and one that will not crack or deform under heat. In addition, the filament provides a beautiful matte black finish.
These mounts are precisely printed with a chopped carbon filament. This filament is rated to withstand much higher temperatures than standard PLA printed filament. What this means for you is a part that will last, at least as long as the factory dashboard, and one that will not crack or deform under heat. In addition, the filament provides a beautiful matte black finish.
Our all-new upper dash mount kit designed to fit the 2013-2018 Ram trucks made from a carbon fiber filament 3D printed to bolt in perfectly in the pen tray. It was specifically designed to work with the Switch Pros 9100 switch unit to provide a perfect mounting solution for the 4th generation Ram trucks.
These mounts are precisely printed with a chopped carbon filament. This filament is rated to withstand much higher temperatures than standard PLA printed filament. What this means for you is a part that will last, at least as long as the factory dashboard, and one that will not crack or deform under heat. In addition, the filament provides a beautiful matte black finish. With this switch mount four new screws are provided to mount the Switch Pros Panel to the mount, and two new screws are provided to mount to the factory pen holder opening.
This package comes with a mount and a Switch Pro 9100 unit
These mounts are precisely printed with a chopped carbon filament. This filament is rated to withstand much higher temperatures than standard PLA printed filament. What this means for you is a part that will last, at least as long as the factory dashboard, and one that will not crack or deform under heat. In addition, the filament provides a beautiful matte black finish. With this switch mount four new screws are provided to mount the Switch Pros Panel to the mount, and two new screws are provided to mount to the factory pen holder opening.
This package comes with a mount and a Switch Pro 9100 unit
Our all-new CJC Built Switch Pros dash mount kit designed to fit 2006-2009 Ram trucks made from a carbon fiber filament 3D printed to fit perfectly into the switch mount on the kick panel. Simply pop out the switch blank and push this one into place! To take things a step further, we also made an engine bay bracket to support and mount the brain with zero drilling. Our mount was specifically designed to work with the Switch Pros 9100 switch unit to provide a clean mounting solution for the 3rd generation Ram trucks with ZERO permanent modification or drilling!
These mounts are precisely printed with a chopped carbon filament. This filament is rated to withstand much higher temperatures than standard PLA printed filament. What this means for you is a part that will last, at least as long as the factory dashboard, and one that will not crack or deform under heat. In addition, the filament provides a beautiful matte black finish.
The base option is just the 3d printed in cab mount and engine bay switch pro "brain" bracket. We also give the option to add a switch pro unit to your order.
Features:
- 12 user-programmable switches
- RCR-TOUCH® switch cover (United States Design Patent No. US D922,969 S)
- Waterproof, solid state power module
-
150amp capacity with 17 outputs
- 4 rated @ 35A and 1 rated @ 30A (High In-Rush circuits)
- 11 rated @ 15A, which can be combined for larger loads
- 1 Low Side driver switch, rated @ 2A
- Built-in Bluetooth module
- Program and operate accessories with phone or tablet
- System can be used to start vehicle
Switch Panel Specs:
- RCR-Touch® cover, snaps on for ease of specific switch selection while wearing gloves or riding rough terrain (United States Design Patent No. US D922,969 S)
- Switch Panel enclosure measures 4” L x 3” W x .375” H (United States Design Patent No. US D914,614 S)
- Splash proof with Polycarbonate overlay faceplate
- Pre-machined for factory-look installation
- RGB backlighting
- Orange LED switch indicators
- 6 Programmable LED Status indicators
Power Module Specs:
- 17 Outputs: 4 rated @ 35A, 1 rated @ 30A, 11 rated @15A, 1 Low Side rated @ 2A
- 150A maximum rating
- 7”L x 3.5”W x .5”H (excluding connectors)
- Waterproof and Solid State
- Underhood rated 125° to -40°C
- LED Ignition Input Status Indicator
Kit Also Includes:
- 11’ of Communication Cable between Switch Panel and Power Module
- Power Cable with 150A inline Circuit protection
- 100 User Selectable Legends included (Horizontal orientation)
- Installation brackets and hardware
- Color Coded Output wires
- Wire harness with waterproof, sealed automotive grade connectors
Switches Can Be Programmed For:
- Preset Dimming function WITH MEMORY (100% to 10% brightness)
- Master Mode, with ability to turn multiple outputs On AND Off with one touch
- Every Master Switch can control up to 4 other switch outputs
- On-On-Off logic
- Touch Panel lockout
- On/Off or Momentary
- Ignition or Battery Input
- Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation
- Automatic Power-Up upon vehicle start up
- Safety Lockout for specific switches
- Time Delay off
Additional Features:
- No bulky relay box
- RGB Backlighting with unlimited color options
- Three External Trigger inputs can each activate up to four outputs (Active Hi or Active Low)
- Sleep Mode for minimal power consumption
- Color coded output wires
- Daisy Chain up to 3 Switch Panels to One Power Module
- Free app for iOs and Android platforms
- Splash proof switch panel with Polycarbonate overlay faceplate
- LED Input Status Indicators for easy troubleshooting
- Battery Voltage Readout on App screen
This CJC Built Auxbeam dash mount kit is designed to fit the 2019+ Ram 1500, 2500, 3500, and Power Wagon trucks is made from a carbon fiber filament that’s 3D printed for a perfect fit in your factory dash. It was specifically designed to work with the Auxbeam 8 button unit to provide a perfect mounting solution for the new Ram trucks using existing hardware on the dash.
We use a filament that's rated to withstand three times the temperature of a standard ABS printed filament and will not crack or deform under heat. This also maintains the factory power port.
AUXBEAM UNIT NOT INCLUDED
