The Full Travel Ford Super Duty Airbag kit is a brand new design that maintains the best balance of ride quality, articulation, and seamless airbag engagement on the market for 17+ Ford Super Duty trucks. Unlike other kits that require a sacrifice at either end of the spectrum, the removable billet spacer in this kit means you can have instant bag engagement when you need it, and smooth unimpeded wheel travel when you don't.
This kit separates itself from the competition in a few key ways. A normal airbag kit will marry the frame and axle of the truck, and only provide the size of the bag as up and down travel which dramatically hurts ride. The Firestone/Daystar kit we introduced offers a cost effective way to maintain full droop travel, better ride quality and as much up travel as possible. That said, the gap between the bag and cradle before engagement translates to about 1" to 1.5" of sag when loaded before the bags engage. This full travel kit utilizes the same principals as the Daystar kit, but expands on them with a machined and removable spacer. This spacer can be installed for instant bag engagement when loaded to prevent sag, and removed to allow for free travel, and complete upward and downward travel of the suspension even with Carli Leaf packs.
This is the ONLY level height airbag kit on the market that allows for full and complete up and down travel of the suspension with Carli leaf packs, while maintaining full towing capability.
Fitment Notes:
Please note that if you have a Carli 4.5" equipped Super Duty, you MUST use this Carli long travel airbag kit. This kit requires 7.5" of frame to tire clearance. Please measure before buying, but this is typically only an issue on dually trucks.
Need a compressor? Click here.













Ride-Rite air helper springs mount between the frame and the suspension of light-trucks, vans, and motorhomes. The heavy-duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200-5,000 lbs per set*. Ride-Rite air helper springs will: Level the vehicle front-to-rear & side-to-side Adjustability 5-100 p.s.i. Stabilize the vehicle while loaded Maximize vehicles load carrying capacity
Applications:
1999-2004 Ford F250/F350
2008-2010 Ford F250/F350
2011+ Ford F250/F350 (Gasoline Only)
Ride-Rite air helper springs mount between the frame and the suspension of light-trucks, vans, and motorhomes. The heavy-duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200-5,000 lbs per set*. Ride-Rite air helper springs will: Level the vehicle front-to-rear & side-to-side Adjustability 5-100 p.s.i. Stabilize the vehicle while loaded Maximize vehicles load carrying capacity
Applications:
1999-2004 Ford F250/F350
2008-2010 Ford F250/F350
2011+ Ford F250/F350 (Gasoline Only)
We want our trucks to do everything. Hit the trails, tow the boat to the river, take us to work and transport the family on long road trips. Adding an air bag system to your full-size truck or SUV has always meant scratching at least one of those off your list. With most air bag systems, the lower air bag mount is placed above the leaf spring significantly reducing wheel travel by design. Your air bag system should compliment your truck, not inhibit its ability. Daystar’s new Air Bag Cradle* (Patent Pending) mounts to your trucks lower suspension providing more room for the air bag to safely cycle with no loss of overall wheel travel. Inferior lower air bag mounts restrict air bag movement using inadequate space, which can lead to unexpected damage to the air bag. Made from extremely tough Daystar Polyurethane, the Air Bag Cradle allows for full suspension travel, while still allowing the full benefits of your air bag system. The Air Bag Cradle fits most full-size pick up trucks, and SUV’s running 6-inch diameter air bags and are made in the USA.
Increase the load capacity and towing capability of your Super Duty without sacrificing ride quality and comfort. Carli's airbags work with up to 12" of suspension travel and are 100% bolt-on DIY. You can install onboard air or use them manually. These are heavy-duty and rated up to 100 psi with a normal operating range of 5 to 75 psi, suitable for big 5th wheels, work trucks, campers, boats, bumper pull trailers and hauling.
SPECIFICATIONS
-12" travel
-100 psi rating
-DIY bolt-on
-Use manually or with onboard air
*CS-FLTB-11 will only fit 2005-2016 SuperDuties with the 3.5" axle tube.
**Ford Super Duty Long travel airbags will ONLY work with 2" of rear lift on an F350 or 3" on an F250 (i.e. trucks with Carli 4.5" kits equipped)! These cannot be used on a stock height truck!
Instructions – CS-FLTB-08
The extended and collapsed dimension combined with ride height piston-depth makes these airbags compatible ONLY with our 4.5″ Lifts, unfortunately. Everything is included to set these up for manual fill but we provide industry standard 1/4″ airline to plumb these into your existing air system if desired. As can be seen below, we offer these for all three axle diameters on the 2017+ Super Duty Platform.
Installation Instructions
Ride-Rite air helper springs mount between the frame and the suspension of light-trucks, vans, and motorhomes. The heavy-duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200-5,000 lbs per set*. Ride-Rite air helper springs will: Level the vehicle front-to-rear & side-to-side Adjustability 5-100 p.s.i. Stabilize the vehicle while loaded Maximize vehicles load carrying capacity
Applications:
1999-2004 Ford F250/F350
2008-2010 Ford F250/F350
2011-2016 Ford F250/F350
Supercedes 2535