This 3.25" tall "Tremor" block kit uses genuine Ford rear blocks from Tremor package trucks, along with our USA made, Zinc plated U bolts and hardware. This kit incudes everything you need to swap the rear of your 2017+ Ford F-250 or F-350 to the same height as a Ford Tremor while maintaining the stock leaf packs. These blocks are the perfect compliment to a 2.5" or 3.5" leveling kit if you find that the stock blocks are too low.
Starting in 2020, Ford lowered all non-Tremor trucks. To make things more confusing, Ford also specs different block heights depending on the trim of the truck, which means that sometimes a leveling kit causes the truck to sit rear low. These blocks are the answer.
Please note that these blocks are compatible with standard airbag kits that mount off the block "tang" but these blocks are NOT compatible with Carli long travel airbags or with Carli leaf packs. This block kit is NOT compatible with LONG BED TRUCKS. For long beds, you'll need this tapered 4" ready lift block.
Customer Reviews
Had just what I needed, when I needed it! Kit brings the rear of my 2024 f250 to just about 3/4” high rake over front with the RC 2.5” level of front. Perfect for me.
I put a 2.5” leveling kit on my 2017 F350 which caused the rear end so sag slightly. These blocks were the perfect touch to get it to sit right, they are inexpensive and took less then 30min to have installed.
After installing a 2” suspension leveling kit my 2023 F250 (not Tremor) looked front high without load. The rear block kit from CJC gave me the ride height I was after.
Easy install, u-bolts needed cutting.
Shipped timely and easy to install. Gave my 2024 stock Lariat with 2" spacers the lift of a Tremor. I had added a 1" lift to front, and now I have the rake I was looking for. Looks and works great!
Leveled the back end to match the front 3.5 commuter level on my 2022 F250
