The ultimate airbag kit for 2014 to current Ram 2500 trucks, the Full Travel airbag kit fulfills the dream of being able to retain FULL wheel travel and ride quality, while still running airbags for factory payload and towing capacity. No other Ram 2500 airbag kit on the market is able to claim full upward and droop wheel travel with no penalty to ride like this kit can.
Designed to work with Carli and Thuren long travel rear coils, this bag kit uses a removable upper plate to allow you to swap between the factory bump stop and an airbag kit in seconds. Quick disconnect air lines like y ou'd see on a compressor allow for simple and easy connection when the bags are installed or removed. Traditionally airbags have always come with a ride quality penalty due to increased spring rate and decreased travel, so for years we've dreamed of an airbag kit that could disappear when needed. This airbag kit allows you to easily install airbags when you need them, and remove them in seconds when you don't. Made entirely in the USA, this kit is also one of the highest quality options on the market featuring all machined aluminum parts, and the highest quality fittings.
Before this was an option, we used a Firestone airbag kit with Daystar cradles. It works as a low cost combo to preserve droop travel, but since it uses an existing airbag not intended around ride quality kit with added cradles, you lose several inches of upward suspension travel, and have increased spring rate due to the bags. That means ride quality suffers. This kit was designed from the ground up to balance the ability to tow and haul, with the ability to have unimpeded wheel travel and ride when empty.
If you want a truck that can tow without sacrificing off road articulation, ride quality and function, look no further.
Fitment Notes:
This airbag kit fits 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Ram 2500 coil rear trucks with a 1-2" rear lift coil and stock Power Wagons of the same year range. This bag kit will fit a stock rear coil truck, but may require you to lift the rear end with a jack or compress the bags by hand to slide them into place. It will not fit on lowered trucks and will not work on factory air trucks.
These airbags will support a combined 3,000 lbs of force at 100psi which is well over the max payload on these trucks. These airbags can be filled manually via a Schrader valve, or you can add a dedicated compressor kit to your order.
