PML GM 4L80E, 4L85E Low Profile  Transmission Pan - CJC Off Road
PML GM 4L80E, 4L85E Low Profile  Transmission Pan - CJC Off Road

PML GM 4L80E, 4L85E Low Profile Transmission Pan

9313

Regular price $375.00 Save $-375.00

0 in stock

Volume: 1.5 qts. over stock

Dimensions: Click here for dimensions.

Number of Bolts: 17

This PML pan fits GM and Chevrolet 1996 and older vehicles with the 4L80E and 4L85E transmission. PML also makes a deeper pan with more capacity for these applications. See part number 9167 for information on that pan.

This pan can be used on 1997 and newer vehicles if there is enough clearance between frame cross member and stock pan. Most 1997 and newer vehicles do not have enough clearance and need thelate model pan. Part number 9437 provides clearance for the exhaust but will not clear the transmission internals on the early models.

This pan can fit on 1993 to 1996 H1 Hummers, but the frame cross member is very close and you will need to check the drain plug location. On a previous revision of this pan, the drain plug was on the bottom, which required a hole to be cut in the frame cross member to allow the pan to drain. The drain plug is now on the side and may be easier to access.

Drain Hole and Location for Temperature Sending Unit

PML GM 4L80E early low profile tranny pan, as-cast
Click on image to view larger.

Image at right shows the rear and driver's side of the pan.

The drain hole is on the driver's side of the pan. All pans include a magnetic drain plug along with the mounting bolts.

On the passenger's side, the pan has a boss that can be machined for a temperature sensor. This is an option and costs $40 per hole. This must be ordered over the phone. Please specify the thread size. PML can drill and tap the boss on the passenger's side between a 1/8 NPT and 1/2 NPT.

Jaguar XJS models with the 4L80 transmission have a stock pan specific to the Jaguar. PML does not make a replacement pan for the Jaguar XJS 4L80 stock pan.

Comparing PML 4L80 Pans

To see an image comparing PML early model 4L80E, 4L85E deep and low profile pans click here.

PML Transmission Pan Installed on a 1929 Model A

Mike at HGM Transmission Controllers updated his Model A with a 4L80 transmission and a PML pan.

Images show (from left to right): the Model A, the ground clearance with the PML pan installed, and a view from the bottom up of the PML pan installed.

Model A with PML transmission pan Clearance on Model A with PML 4L80 transmission pan Model A with PML 4L80 transmission pan installed
Click on an image to view larger in a separate window or tab.

PML Transmission Pan Features

  • Increased oil capacity for cooler temperatures
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Magnetic drain plug for easier, less messy maintenance
  • Mounting hardware provided

Find out why you should buy a PML transmission pan.

Gasket and filter not included (use stock parts).

Learn more about finishes and construction of PML parts.

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please place your order over the phone if you would like machining.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)