PML Nissan RE5R05A Deep  Transmission Pan - CJC Off Road
PML Nissan RE5R05A Deep  Transmission Pan - CJC Off Road

PML Nissan RE5R05A Deep Transmission Pan


Regular price $365.00 Save $-365.00

-32 in stock

Volume: 3.5 qts. over stock

Dimensions: are in this pdf file. This pan is 2 ¼ inches deeper on the outside and 1 ½ inches deeper on the inside than a stock Titan pan at its deepest point. Always check your vehicle to verify transmission and clearance before ordering.

Number of Bolts: 22

This PML transmission oil pan for the Nissan RE5R05A fits Titan, Armada and Navara. This pan features extra capacity and fins for cooling, thick wall construction, and a drain plug to facilitate oil changes. Many Nissan and Infiniti trucks, cars, and SUVs use the RE5R05A transmission and PML makes three pans to accommodate various clearance requirements.

350Z, Infiniti G35 and QX56 need our low profile pan. See the PML low profile Nissan pan web page.PML designed the low profile pan for vehicles that do not have ground clearance for a deep pan. This includes some trucks like Titans with skid plates or Navaras.

Frontier, Xterra, and Pathfinder owners have reported cross members running under two corners of the stock pan and need PML part number 11101.

NV Owners: this pan may work for you. Nissan NV cargo and passenger vans, 2011 to 2014, are based on the Titan truck and have the RE5RO5A transmission. Let us know if you have an NV and are interested in a deeper transmission pan. Call us at 800-335-4345 or email us

Read on the Titan Talk forum about lower transmission fluid temperatures after installing a PML pan in the Titan performance modifications thread.

Filter and Gasket

The filter on the RE5R05A is a screen, and it bolts on to the valve body of the transmission so no filter supports or extensions are needed.

This transmission pan works with stock gaskets. These are usually about $20 to $25 from your local Nissan dealer. The Nissan part number 3139790X0A (2007 and newer) or 3139790X00 (2003 to 2007) for Titan trucks.

Temperature Sensor

This pan has a boss that can be machined and tapped for a temperature sending unit.

The standard Titan transmission temperature gauge usually included with the tow package works independent of the transmission pan so you do not need the boss machined. The boss provided in this pan can be machined for use with aftermarket sensors and gages.

Internal Baffles

PML designed this tranny pan with internal baffles. The baffles help direct oil flow to keep oil at the filter inlet, prevent sloshing, and aid heat transfer from oil to pan.

PML Nissan trans pan and Titan stock pan Inside of PML trans pan and stock pan for Nissan Titan PML's pan compared to a stock Titan tranny pan. The PML pan has not yet been machined.

Note the baffles on the inside of the PML pan.


Titan 2005 SE 2WD Crew Cab

Stock Titan tranny pan
Before: Stock pan on Darryl's truck
PML pan installed on Titan
After: PML extra-capacity pan installed
Happy Truck!
Darryl's 2005 Titan SE 4WD crew cab - looking good and running cool

Armada 2006

2006 Nissan Armada
2006 Armada in the garage for transmission service and new PML RE5R05A pan
PML RE5R05A transmission pan installed on Armada
PML pan fits great - putting in the drain plug now
Armada with PML transmission pan
Ready to go

Navara 2006, In Nairobi, Kenya

2006 Nissan Navara
Stock Navara pan compared to the PML RE5R05A pan
PML RE5R05A transmission pan installed on Navara
PML pan fits great

Nissan Navara is similar to the Frontier in the US. Pan has black powder coat finish and is machined for 1/8 NPT. For more clearance see our low profile Nissan pan.

Our thanks to Fizan for the pictures.

PML Transmission Pan Features

  • Increased oil capacity for cooler temperatures
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Magnetic drain plug for easier, less messy maintenance
  • Mounting hardware provided

Find out why you should buy a PML transmission pan.

Gasket and filter not included (use stock parts).

Learn more about finishes and construction of PML parts.

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please place your order over the phone if you would like machining.

For a larger picture, please click on one of the above images. A separate window or tab will open showing a bigger picture. (The larger pictures take a minute to display.)

Customer Reviews

Based on 2 reviews
Harley Boatz
Perfect addition for a tow rig

Great quality transmission pan, drops running atf temps and looks cool to boot

Kevin Peralta
Titan transmission pan

Excellent quality and 2 day shipping highly recommended