The Ultimate 2026 Ford F-250 Super Duty Tremor Build
Simple, functional, and capable but still turns heads. To us, we achieved it!
Our 2026 Ford F-250 Platinum Tremor Super Duty may not be the typical “SEMA Build” on a 20” lift with 30” wheels, and that’s exactly the way we like it. Our goal is something that’s simple, functional, and capable but still turns heads. To us, we achieved it!
This truck started as a bone stock 2026 Ford F-250 Platinum Tremor Super Duty with the High Output Power Stroke 6.7L Engine. Lots of people ask why start with a Tremor when you’re doing upgrades on the suspension, but the suspension on a Tremor is actually the least important part. Ford uses an F-350 leaf pack and the taller 17-19 height front coils as the factory “lift” so you aren’t losing much taking it off. The benefit of the Tremor is in the other adds ons including the taller 3.55 gears, front limited slip diff, off road drive modes, and extra water proofing on the electronics. To us, it’s a worthwhile package if you’re spending any time in the dirt and putting larger tires on the truck.
The build has been through a few stages so far, documented on our YouTube channel here. We’ll dive into its current state. The base of the truck is a Carli level height Pathfinder system. This setup pairs the controlled feel of a 2.5 reservoir shock, with a street friendly valving profile. While the Pathfinder doesn’t have the all out off road capability present on the Pintop, E-Venture and Dominator systems, it’s a solid option for trucks seeing more normal off road usage mixed with daily driving and towing. It’s no slouch either with 8.7” front travel and 12.9” rear travel which is a huge increase over stock.
The base Pathfinder system is complimented by a Carli torsion sway bar, high and low mount steering stabilizers, Carli radius arms, soft ride rear leaf packs, shackles and then Full Travel Airbags. The airbags are key to maintain towing capacity despite the softer leaf springs and added suspension travel so the truck can still tow at factory specs.
A set of 18x9 0 offset Foundation 395 HD Flow Formed wheels spec’d with custom Marsh Grey OMF Rings and silver stainless 12pt hardware finish the look, wrapped in 38/13.5/18 Nitto Ridge Grapplers. These are our one of our favorite all around tires combining good traction, low noise, and good looks. Clearance is provided by a set of our in house 3D printed high clearance fender caps. We even have a matching full size spare under the truck thanks to a Carli Trophy Hitch.
Lighting is the next major upgrade area. Moving front to back the truck has a CJC X S&B dual Squadron 2.0 fog kit, a Carli Suspension light bar with 5 Baja Designs LP6 Pro lights, custom Retroshop LLC painted AlphaRex Nova Series lights, and a Baja Pro third brake light.
The custom paint theme is also subtly applied to the rest of the truck, with a satin metallic grey grille, fog bezels and rear Platinum tailgate appliqué to get rid of the factory brushed finish. We also color matched the mirror caps and fender badges.
The final piece of the build is a CJC X Banks Trophy Exhaust which clears the massive 38” spare tire and leaf packs-even at full droop.
This truck is extremely capable, comfortable, and ready for just about anything we could throw at it. While there’s plenty of Mash Grey trucks out there at this point, we haven’t seen too many built to this extent of capability! We want to say a special thank you to AlphaRex for asking us to be in their booth!