Filter 2011+ FORD SUPER DUTY
5 products
Overview:
This 2.5” Leveling System is a great way to level your 4WD 2005-2011 F-350 Super Duty front to rear. The system’s components provide for better-than-stock ride quality and is perfect for the cost-conscious truck owner who wants a level truck and a smooth ride.
For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Series Mono-tube Rear Shocks.
Technical Specs:
50%increase in wheel travel
Less body-roll than stock truck
2 ”more travel from ride height to front bump stops
State-of-the-art dual-rate coil spring
Application Specific Alignment Cams ensure proper Caster alignment
Lifetime guarantee that coil springs won’t sag
Clears 34" Tall Tires & 35" Tall Tires w/ Minor Trimming
No change in towing capacity
No drive shaft modifications needed
100%Bolt-on system - no drilling,cutting or welding necessary for install
Made in the USA
System Contains:
62510 - 2.5" Lift Dual Rate Coil-Spring w/ Alignment Cam Kit
66512 - Front ICON 2.0 Aluminum Series Mono-tube Shocks
36508 - Rear ICON 2.0 Aluminum Series Mono-tube Shocks
F-250 Rear Components
Due to the lower rear ride height the following components need to be added to level an F-250. Please choose yes for F250 and they will be added to your cart.
194275 - 4" Rear Blocks w/ Built in Bump Stops
37003 - Rear U-Bolt Kit
***Must be added***
When using the TEI Spacer (Part#61600) in conjunction with a FSD 2.5" Leveling Coil-spring Kit, the supplied alignment cams may not add enough castor and additional parts may be required
Overview:
This 2.5” Leveling System is a great way to level your 4WD 2005-2011 F-350 Super Duty front to rear. The system’s components provide for better-than-stock ride quality and is perfect for the truck owner who wants a level truck and a smooth ride. This stage 5 system upgrades the front and rear shocks to our 2.5" diameter Omega Series Modular Bypass shocks. The system also includes our adjustable pan-rod bar and steering stabilizer kit and shocks. The combination of these compnenets offers the ultimate in drivability. The Omega Series shocks allow for on vehicle adjustment of shock rebound and compression
For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Series Mono-tube Rear Shocks.
Technical Specs:
50%increase in wheel travel
Less body-roll than stock truck
2 ”more travel from ride height to front bump stops
State-of-the-art dual-rate coil spring
Application Specific Alignment Cams ensure proper Caster alignment
Lifetime guarantee that coil springs won’t sag
Clears 34" Tall Tires & 35" Tall Tires w/ Minor Trimming
No change in towing capacity
No drive shaft modifications needed
100%Bolt-on system - no drilling,cutting or welding necessary for install
Made in the USA
System Contains:
62510 - 2.5" Lift Dual Rate Coil-Spring w/ Alignment Cam Kit
69900 - Front 2.5" Omega Series Modular Bypass Shocks
39905 - Rear 2.5" Omega Series Modular Bypass Shocks
64031 - Adjustable Pan-Rod Bar With Rod End Bearing
65000 - Sterring Stabilizer Bracket Kit
36511 - 2.0 Aluminum Series Steering Stabilizer Shocks (Pair)
F-250 Rear Components
Due to the lower rear ride height the following components need to be added to level an F-250. Please choose yes for F250 and they will be added to your cart.
19-4275 - 4" Rear Blocks w/ Built in Bump Stops
3-7003 - Rear U-Bolt Kit
***Must be added***
Please Note: When using the TEI Spacer (Part#61600) in conjunction with a FSD 2.5" Leveling Coil-spring Kit, the supplied alignment cams may not add enough castor and additional parts may be required
Overview:
This 2.5” Leveling System is a great way to level your 4WD 2005-2011 F-350 Super Duty front to rear. The system’s components provide for better-than-stock ride quality and is perfect for the cost-conscious truck owner who wants a level truck and a smooth ride. This stage 4 system upgrades the front and rear shocks to our 2.5" diameter Piggy-Back shocks. The system also includes our adjustable pan-rod bar and steering stabilizer kit and shocks. The combination of these compnenets offers the ultimate in drivability.
For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Series Mono-tube Rear Shocks.
Technical Specs:
50%increase in wheel travel
Less body-roll than stock truck
2 ”more travel from ride height to front bump stops
State-of-the-art dual-rate coil spring
Application Specific Alignment Cams ensure proper Caster alignment
Lifetime guarantee that coil springs won’t sag
Clears 34" Tall Tires & 35" Tall Tires w/ Minor Trimming
No change in towing capacity
No drive shaft modifications needed
100%Bolt-on system - no drilling,cutting or welding necessary for install
Made in the USA
System Contains:
62510 - 2.5" Lift Dual Rate Coil-Spring w/ Alignment Cam Kit
67700 - Front 2.5" Piggy-Back Reservoir Shocks
37705 - Rear 2.5" Piggy-Back Shocks
64031 - Adjustable Pan-Rod Bar With Rod End Bearing
65000 - Sterring Stabilizer Bracket Kit
36511 - 2.0 Aluminum Series Steering Stabilizer Shocks (Pair)
F-250 Rear Components
Due to the lower rear ride height the following components need to be added to level an F-250. Please choose yes for F250 and they will be added to your cart.
19-4275 - 4" Rear Blocks w/ Built in Bump Stops
3-7003 - Rear U-Bolt Kit
***Must be added***
Overview:
This 2.5” Leveling System is a great way to level your 4WD 2005-2011 F-350 Super Duty front to rear. The system’s components provide for better-than-stock ride quality and is perfect for the cost-conscious truck owner who wants a level truck and a smooth ride. This stage 3 system upgrades the front and rear shocks to our 2.5" diameter Piggy-Back shocks for the ultimate in ride quality and performance.
For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Series Mono-tube Rear Shocks.
Technical Specs:
50%increase in wheel travel
Less body-roll than stock truck
2 ”more travel from ride height to front bump stops
State-of-the-art dual-rate coil spring
Application Specific Alignment Cams ensure proper Caster alignment
Lifetime guarantee that coil springs won’t sag
Clears 34" Tall Tires & 35" Tall Tires w/ Minor Trimming
No change in towing capacity
No drive shaft modifications needed
100%Bolt-on system - no drilling,cutting or welding necessary for install
Made in the USA
System Contains:
62510 - 2.5" Lift Dual Rate Coil-Spring w/ Alignment Cam Kit
67700 - Front 2.5" Piggy-Back Shocks
7701 - Rear 2.5" Piggy-Back Shocks
F-250 Rear Components
Due to the lower rear ride height the following components need to be added to level an F-250. Please choose yes for F250 and they will be added to your cart.
194275 - 4" Rear Blocks w/ Built in Bump Stops
37003 - Rear U-Bolt Kit
***Must be added***
Please Note: When using the TEI Spacer (Part#61600) in conjunction with a FSD 2.5" Leveling Coil-spring Kit, the supplied alignment cams may not add enough castor and additional parts may be required
Overview:
This 2.5” Leveling System is a great way to level your 4WD 2005-2011 F-350 Super Duty front to rear. The system’s components provide for better-than-stock ride quality and is perfect for the cost-conscious truck owner who wants a level truck and a smooth ride. This stage 2 system upgrades the front shocks to our 2.5" diameter Piggy-Back shocks for the ultimate in ride quality and performance.
For F-250 applications, a 4" block can be used in place of your factory 2" block, in turn leveling the truck from front to rear, allowing use of ICON Series Mono-tube Rear Shocks.
Technical Specs:
50%increase in wheel travel
Less body-roll than stock truck
2 ”more travel from ride height to front bump stops
State-of-the-art dual-rate coil spring
Application Specific Alignment Cams ensure proper Caster alignment
Lifetime guarantee that coil springs won’t sag
Clears 34" Tall Tires & 35" Tall Tires w/ Minor Trimming
No change in towing capacity
No drive shaft modifications needed
100%Bolt-on system - no drilling,cutting or welding necessary for install
Made in the USA
System Contains:
62510 - 2.5" Lift Dual Rate Coil-Spring w/ Alignment Cam Kit
67700 - Front 2.5" Piggy-Back Reservoir Shocks
36508 - Rear ICON Series Mono-tube Shocks
F-250 Rear Components
Due to the lower rear ride height the following components need to be added to level an F-250. Please choose yes for F250 and they will be added to your cart.
19-4275 - 4" Rear Blocks w/ Built in Bump Stops
3-7003 - Rear U-Bolt Kit
***Must be added***
Please Note: When using the TEI Spacer (Part#61600) in conjunction with a FSD 2.5" Leveling Coil-spring Kit, the supplied alignment cams may not add enough castor and additional parts may be required