Safety, protection and style – this is the foundation upon which AEV’s bumper design philosophy is built. As the aftermarket’s first and only stamped steel bumper for the HD Ram truck, AEV’s Front Bumper offers an unparalleled level of front end protection while also enhancing the truck’s appearance with its sleek, sophisticated styling.
AEV’s Front Bumper is robust and engineered to work just as hard as the truck it’s installed on. Massive ductile iron recovery points are rated to pass all OE load specifications and double as wear plates to slide over steep obstacles. A 4mm thick stamped steel face provides a superior level of protection while also safely accommodating an optional Winch Mount and a 12-16,500lb Warn winch to assist with vehicle recovery. An optional Winch Delete Kit is available for customers who are not installing a winch.
HD Ram trucks are designed to work hard and tow heavy loads which makes proper engine cooling essential, especially in hot environments and higher elevations. Airflow underneath and through the bumper is critical due to the lower intercooler position on late-model Ram 2500/3500 trucks, so a unique intercooler shroud is supplied to ensure that there is no loss in cooling efficiency after the AEV Front Bumper is installed – something often overlooked in the aftermarket. Trucks equipped with a gasoline engine will receive a cooling shroud to help direct airflow to the radiator.
AEV’s Front Bumper is fully compatible with ParkSense, a parking assist feature found on many higher trim levels. Sensor holes pre-drilled and the factory harness can be re-used, for a truly plug-n-play installation. Closeout plugs are included for the trucks that do not have front ParkSense. An extremely durable, multi-stage e-coat and powder coat finish is used for the best possible corrosion resistance, and any abrasions from obstacles off-road can be easily touched-up using AEV Bumper Touch-Up paint. All bumpers are proudly manufactured in the USA.



The AEV Intercooler Skid Plate for 2014+ HD Ram trucks protects the intercooler (and electronic sway bar disconnect on Power Wagon) from damage, without blocking-off critical airflow.
In 2014, HD Ram Trucks switched to an intercooler that was mounted lower for improved airflow and increased power. However, most of the aftermarket bumpers for these trucks remained the same and did not take into account the new airflow requirements. AEV was mindful of this when designing the HD Front Bumper, so it was absolutely critical that our Skid Plate met those same airflow requirements. For this reason, a vertical 6-bar design (using 1” DOM steel tube) was chosen to offer the best possible combination of airflow to the intercooler, protection, and accessibility for cleaning. This Skid Plate also provides increased protection for the vulnerable (and very expensive) OEM electronic sway bar disconnect system on Power Wagon models.
Installation is very straight forward and can be done with the Front Bumper on the vehicle. Ram 3500 owners WITHOUT a compatibility beam (see FAQ below), will need to purchase the supplemental 3500 Installation Kit in addition to the AEV Intercooler Skid Plate.
- For 2014+ Diesel HD Ram and Power Wagon
- Protects the intercooler and electronic sway bar disconnect on Power Wagon
- NO adverse effect on cooling
- Proprietary coatings for superior corrosion protection
- Made in the USA



AEV’s Rear Bumper is now available for 2010+ HD Ram trucks!* Just like AEV’s Front Bumper, the HD Ram Rear Bumper is not just for good looks – it is designed to withstand all the rigors of off-road use and overland travel. The Rear Bumper maximizes departure angle and offers integrated tubular steel corner protection for the bed. To assist with vehicle recovery, a pair of heavy duty ductile iron recovery points are included for easy rigging of anchor shackles.
Since AEV’s Rear Bumper is designed with both 4th and 5th generation HD Rams in mind, so all the necessary provisions have been made to accommodate all the latest technology found on newer trucks like ParkSense, Passive Entry Tailgate and even Trailer TPMS. Two molded step pads are included for increased traction when stepping up on to the bumper. The AEV Rear Bumper is compatible with the OE trailer hitch , trailer plug and spare tire winch access locations stay the same and function as they should. A new license plate is included.
To help maximize driver visibility while backing up to a trailer or down a narrow path in the dark, AEV added a provision for two 3” square LED reverse lights to be mounted cleanly behind the bumper when used with the optional Auxiliary Light Mounting Kit. An optional High Clearance Tailpipe Kit is also available for 2019+ HD trucks (diesel only) to help tuck the exhaust tip higher up to prevent unwanted damage when out on the trail.
AEV’s HD Ram Rear Bumper is E-coated and powder coated for maximum corrosion resistance and is proudly manufactured in the USA.





