Carli Suspension Products are created to meet the expectations of the daily street driver to the most extreme avid off road enthusiast.
70 products
Carli's ball joints start out as a chunk of specialty chosen material which is machined to Carli's unique design and then heat treated to a specified rockwell (hardness). From there the ball joints head to an aero-space lube company where a proprietary dry-lube coating is applied to their specified thickness. Carli tops them off with an accessible zerk fitting for easy servicing, plus they even include a tube of high quality synthetic grease with each ball joint set.
SPECIFICATIONS
-Warrantied for life.
-In lieu of enumerating the materials, processes, and design characteristics of Carli's Ball Joints, they're just going to stand behind this component for as long as you own it. If for any reason the performance of Carli's Ball Joint declines, Carli will stand behind it. For the life of your purchase. After the finalization of the R&D process Carli is confident that this part will never fail.
Installation Instructions
For more details on Carli's limited lifetime warranty, click here.
SPECIFICATIONS
-Warrantied for life.
-In lieu of enumerating the materials, processes, and design characteristics of Carli's Ball Joints, they're just going to stand behind this component for as long as you own it. If for any reason the performance of Carli's Ball Joint declines, Carli will stand behind it. For the life of your purchase. After the finalization of the R&D process Carli is confident that this part will never fail.
Installation Instructions
For more details on Carli's limited lifetime warranty, click here.
Customer Reviews
No reviews yet
Write a review
Carli's new 2003-2013 Dodge Ram 2500/3500 4x4 adjustable track bar is a must for any Dodge 2500/3500 4x4 suffering from wandering steering or with an aftermarket lift. The track bar will center the axle side to side and ensure proper suspension geometry. The track bar will also give a tighter feel to the front end by eliminating the O.E.M rubber bushings. Included with each track bar are all required spacers, crush sleeves, and shims to fit each specific vehicle's stock hardware. On one end is a custom F.K. Heim Joint that offers articulation and rigidity with an improved service life over other styles of bushing. On the opposite end is an heavy duty captured uniball bearing for maximum strength and life-span. A laser-cut gusset surrounds the uniball welded cup to ensure that this track bar will be the last you ever buy.
SPECIFICATIONS-Constructed from 1.50" x .375" wall Chromoly tube
-CNC bent for perfect fitment
-Fixture-welded in house
-Pre-loaded captured bushing
-Captured 7/8" FK Uniball on frame side and heim joint on the axle side
-Includes misalignment spacers
-Includes sleeves for both 14MM and 16MM applications
FITMENT
Fits 1994-2013 Dodge Ram 2500 4x4 and 1994-2012 Dodge Ram 3500 4x4 trucks. Fitment on 1994-2002 trucks is possible with a 3rd Party conversion bracket, but we cannot guarantee fit or clearance.
Installation Instructions
THIS IS A DIESEL ONLY SYSTEM
Carli Suspension went back to the drawing board to make the best leveling kit on the market. While there's plenty of other coil and shock levels, the attention to detail and custom tuning inside set this one apart from the pack. After months of tuning, Carli enlisted Fox to custom build shocks specifically for the 14+ Ram 2500 platform, and create unique valving for the front Carli coils and factory rear coils. Designated by a unique shock part number, these shocks are different from any other kit on the market.
Carli also uses a tuned linear rate coil that dramatically improves ride, doubles front suspension travel, and levels the truck by increasing front height 2.5" over factory.
The front axle will be slightly pulled to the Driver’s side following installation of this level, which can be corrected with Carli's track bar.
We recommend a 35” tire on an 18” wheel that’s no more than 9” wide with 0 to +27 offset. To fit 37s on a Ram truck we recommend a +18 to +27 offset wheel that is no wider than 9,” as well as some mild trimming of the plastic fender liner and maybe pinch weld depending on the tire.
Recommended unloaded tire pressure is 45F/40R. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.
INCLUDES
-Front Fox 2.0 IFP Carli Tuned Shocks
-Rear Fox 2.0 IFP Carli Tuned Shocks
-Front Linear Rate Coils
SPECIFICATIONS
-2.5" Front Lift
-Stock Rear Height/Towing Capacity
-Level Ride Height
-Designed for Di