13 products
If you you are looking to improve ground clearance and looks on your 2020, 2021, or 2022 Ford F-250 or F-350 this Tremor valance is the way to go. This is an OEM Ford part normally used on Tremor package trucks, but it makes the perfect upgrade to get rid of the massive factory air dam normally included with standard 4wd Super Duty trucks.
Unlike most listings on eBay etc that list the 2wd valance or a third party copy, this is the true OEM Tremor valance part number direct from Ford!
Customer Reviews
No reviews yet
Write a review
Need a bit of extra clearance when turning after you added larger tires to your 2017+ Ford Super Duty? Our modular 3/8 to 3/4" spacers will give a bit of extra room to clear the larger tires. Made from 3/4" laser cut steel, powder coated a low gloss textured black. Includes enough spacers to provide complete 3/4" spacing per kit.
(4) 3/4" large spacers for the front face of the bumper, and (2) 3/4" small spacers for the wheel well bracket are included, along with all necessary hardware.
Please note that these bumpers ship raw and must be powder coated or painted. Baja Designs S2 work/scene holes are cut into these bumpers. We provide the option on this page to include the lights as well. We’re proud to introduce this CJC Built rear bumper which utilizes your factory back up sensors, license plate lights, trailer hitch plug, and spare tire lock. These bumpers fit 2017-2022 Ford Super Duty trucks. Please check out our front bumpers here and watch the full video on these bumpers below.
Please note that bumpers ship raw and must be painted or powder coated. We are proud to offer our own in house, CJC Built front Ford bumpers for 2017-2022 Ford Super Duty trucks. This bumper is designed to fit two Baja Designs XL lights and two Baja Designs Squadrons in the fog pocket holes. This bumper is NOT compatible with trucks that have adaptive cruise control unless you use a re-location bracket.
Please check out our rear bumper here. Watch the full video on these bumpers below. Check out the install instructions here.
Customer Reviews
No reviews yet
Write a review
The Chassis Unlimited “Octane Series” Light bar style front bumper ships to your door ready to install on your truck, complete with our 3-Stage texture black powder coat.
Our Non-Winch Bumper features room for a 30" curved or straight dual row light bar, HD 1” thick recovery points, and mounts up to 4 LED Cube lights in the outer wings of the bumper.
The Octane series bumpers bring an entire new style to the bumper market and offer an industry first low-profile fitment with aggressive styling. The Octane series is designed as a 3 Piece modular bumper, the outer bumper wings bolt to the center core section of the bumper. This modular design allows us to offer an extreme tight contour of the vehicle, as well as a product design & extreme strength that will last a lifetime. All of Chassis Unlimited’ s products are designed & manufactured in Livermore California
This bumper also includes two center section lighting options for the bumper- You can either choose to install a 30” curved or straight dual row LED Light bar or install eight 3” LED Cube lights. Both light mounting options are included in the bumper, and the choice is yours which look you prefer to use. There is also two 3” Cube lights in each wing of the bumper, totaling four Cube lights in the front bumper.
Simple bolt on installation, no welding or grinding is needed to install our Octane Series bumpers. Most installations are completed in a few hours or less with basic hand tools; the bumpers directly bolt on to your vehicle. Remove your factory bumper/mounts, and our product directly bolts onto your vehicle’s factory bumper mounting locations.
LED LIGHTS ARE NOT INCLUDED.
Included Features:
- Manufactured from 3/16” USA Steel
- Light mounting brackets for 30” Curved/Straight dual row LED Light bar, or Eight 3” LED Cube Lights
- Each side of the bumper has mounting brackets in the outer wing for two 3” LED Cube Lights (4 total)
- Includes heavy duty CNC Machined 1” Thick recovery points with a 1” Bore
- Designed & Manufactured in California
- Bumpers ships complete with 3-stage black texture powder coat
- LIGHTS SOLD SEPARATELY
This Model Fits years 2017, 2018, 2019, 2020, 2021
FORD F250 & F350 GAS & DIESEL Trucks - Fits All Trim Levels
The Chassis Unlimited “Octane Series” Light bar style front bumper ships to your door ready to install on your truck, complete with our 3-Stage texture black powder coat.
Our Non-Winch Bumper features room for a 30" curved or straight dual row light bar, HD 1” thick recovery points, and mounts up to 4 LED Cube lights in the outer wings of the bumper.
The Octane series bumpers bring an entire new style to the bumper market and offer an industry first low-profile fitment with aggressive styling. The Octane series is designed as a 3 Piece modular bumper, the outer bumper wings bolt to the center core section of the bumper. This modular design allows us to offer an extreme tight contour of the vehicle, as well as a product design & extreme strength that will last a lifetime. All of Chassis Unlimited’ s products are designed & manufactured in Livermore California
This bumper also includes two center section lighting options for the bumper- You can either choose to install a 30” curved or straight dual row LED Light bar or install eight 3” LED Cube lights. Both light mounting options are included in the bumper, and the choice is yours which look you prefer to use. There is also two 3” Cube lights in each wing of the bumper, totaling four Cube lights in the front bumper.
Simple bolt on installation, no welding or grinding is needed to install our Octane Series bumpers. Most installations are completed in a few hours or less with basic hand tools; the bumpers directly bolt on to your vehicle. Remove your factory bumper/mounts, and our product directly bolts onto your vehicle’s factory bumper mounting locations.
LED LIGHTS ARE NOT INCLUDED.
Included Features:
- Manufactured from 3/16” USA Steel
- Light mounting brackets for 30” Curved/Straight dual row LED Light bar, or Eight 3” LED Cube Lights
- Each side of the bumper has mounting brackets in the outer wing for two 3” LED Cube Lights (4 total)
- Includes heavy duty CNC Machined 1” Thick recovery points with a 1” Bore
- Designed & Manufactured in California
- Bumpers ships complete with 3-stage black texture powder coat
- LIGHTS SOLD SEPARATELY
This Model Fits years 2011, 2012, 2013, 2014, 2015, 2016
FORD F250 & F350 GAS & DIESEL Trucks - Fits All Trim Levels
