7 products
This 3 Leaf Progressive Add a Leaf Kit comes complete with U-bolts and Center pins for an easy install. This add a leaf kit will give your Tacoma / Tundra 1.5" of lift after installation. Just remove the factory overload and say good bye to that rough factory ride.
This 2 Pin Spanner Wrench is a must to adjust your ICON Coil-over Shocks. The Two Pin deisgn makes it easier to adjust no matter how much room you have to insert the wrench.
Overview:
These adjustable coil-over shocks have proven their strength and longevity for years on end and they keep going. These shocks offer the best ride quality and handling. They increase suspension travel and dramatically increase the capabilities of your 00-06 Tundra's front suspension. These coil-over’s are meant to be instaloled with an aftermarket uniball upper control arm kit to ensure the proper amount of wheel travel and to prevent premature ball joint wear. Recommended tire size 285/75R16, wheel 16X8 with 4.5" back spacing.
Technical Specs:
Adjustable ride height from 0" - 2.5"
Race shock piston with flutter stack compression valving
Cad-plated threaded body / Extreme Weather Plating Option Available
Billet aluminum upper mount
5/8" PTFE-lined spherical bearing
Completely re-buildable
2.5" shock diameter to prevent overheating
Chrome-silicon spring
250 PSI nitrogen-charged internal reservoir
100% Made in the USA
Nitro-steel shaft will not chip or rust like chrome shafts
Add to Wish List
Click the button below to add the 2000 - 2006 Tundra Ext. Travel Front Coil-over Shock Kit to your wish list.
Recently Viewed
198000 - 2 Pin Spanner Wrench - ALL ICON Coil-over Shocks
ICON Tubular UCA Uniball Cover Cap Kit
ICON 2.0 Aluminum Series Shock Reservoir Clamp Kit - 2.0 to 2.0
Overview:
These adjustable coil-over shocks have proven their strength and longevity for years on end and they keep going. These shocks offer the best ride quality and handling. They increase suspension travel and dramatically increase the capabilities of your Tundra's front suspension. These coil-over’s come complete with all the hardware necessary to complete the installation. These are a Race-Proven shock designed for the daily driver and the avid offroader all in one! Recommended tire size 285/75R16, wheel 16X8 with 4.5" back spacing.
Technical Specs:
Adjustable ride height from 0" - 2.5"
Race shock piston with flutter stack compression valving
Cad-plated threaded body / Extreme Weather Plating Option Available
Billet aluminum upper mount
5/8" PTFE-lined spherical bearing
Completely re-buildable
2.5" shock diameter to prevent overheating
Chrome-silicon spring
250 PSI nitrogen-charged internal reservoir
100% Made in the USA
Nitro-steel shaft will not chip or rust like chrome shafts
ICON Vehicle Specific (V.S.) 2.5 Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications; ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. If you are looking for a more user defined tune, consider looking into the OMEGA Series bypass shocks.
KEY FEATURES:
ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Nitrogen charged monotube design with piggyback reservoir
One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
7/8” diameter induction hardened, chrome plated shock shaft
PTFE lined spherical bearings and application specific mounting hardware
6061 aircraft grade aluminum CNC machined components
CAD plated, precision machined 1026 DOM steel shock body for maximum durability and corrosion resistance
100% Rebuildable
100% Revalveable
Made in the U.S.A.
NOTES:
ICON V.S. 2.5 Series shocks are sold in pairs
Price listed is for two (2) shock absorbers
For individual shock purchase, please contact an authorized ICON dealer
Overview:
These 2.5" Diameter Piggyback Manifold Shocks are a great way to add more performance and a much better ride quality to your rear suspension. These shocks are specifically valved to give the 2000-2006 Tundra and are fine are tuned for better performance than our standard 2.0 Mono-tube Shocks.
These Shocks are sold INDIVIDUALLY.
Technical Specs:
Low Profile Billet Top Cap
Stem Top Design for O.E. Fitment and Optimum Wheel Travel
ICON Vehicle Dynamics "Bump Zone" For an Addtional 20% Increase in Compression and Rebound the last two inches of Travel
Reservoir Eliminates Shock Fade and Increases Wheel Travel
Lifetime guarantee that coil springs won’t sag
Two Stage Disogrin Seals for Prolonged Lifespan and Maximum Durability
Durable Spherical Bearings Eliminate Unwanted Deflection
7/8" NitroSteel Shaft prevents pitting and rust better than any chrome shaft
100%Bolt-on system - no drilling,cutting or welding necessary for install
Made in the USA
Does not work with rear add a leaf pack.......Only works with rear 1" or 2" lift block
Overview:
ICON's Monotube series shocks are great for any purpose. On or off-road these shocks will give you the best performance and ride quality. They are also backed by ICON's Life-time Warranty. These are the last shocks you will ever have to buy for your Tundra.
Sold INDIVIDUALLY!!