The FOX Performance Series Adjustable Through Shaft (ATS) steering stabilizer offers unrivaled steering control and a striking high tech appearance. The technologically advanced design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It will also respond to your input with 24 clicks of external adjustment to fine tune the feel. The integrated reservoir allows for additional fluid capacity and improves cooling during extreme use. Also included is FOX's relocating hardware that moves the steering stabilizer up and out of the way utilizing a new track bar relocation bolt and tie-rod mounting clamp. The ATS represents a revolutionary breakthrough in stabilizer design.
Specifications:
- Body - Aluminum shock body dissipates heat three times faster than steel
- Components - Black anodized 6061-T6 billet aluminum
- Shaft - 5/8" hard chrome plated heat treated alloy steel
- Piston - Race-developed high-flow piston design
- Valving - Proprietary deburred valve shims
- Seals - Redundant sealing pack system main seal, wiper seal, scraper seal
- Oil - Specially formulated for ultimate performance at variable temperatures
- Reservoir - External reservoir design separates shock oil from the high-pressure nitrogen
- Mounting - Applications available for stock and aftermarket lifts kits
Adjustments:
- Nitrogen Pressure Adjuster
- 24 Clicks of Adjustability
Part # | Clamp Size | Fits |
---|---|---|
FOX-983-02-070 | 1-3/8" | Stock, Synergy and most other aftermarket tie rods. |
FOX-983-02-088 | 1-5/8" | Rock Krawler tie rods |
Note: If installing stabilizer on 2012 and newer model with stock suspension or with less than a 2.5'' lift and aftermarket 1-1/4'' bump stop extension, the stabilizer reservoir must be rotated for clearance. Loosen pinch bolt on L-bracket between stabilizer and track bar clamp, rotate reservoir approximately 135 degrees down and toward rear of vehicle.






Description:
![]() |




- This acrylic enamel aerosol touch-up coating is designed for touch-up and repair of previously powder coated surfaces
- This coating is classified as "exact match finish: industrial" by CARB (California Air Resources Board)
- Black is mainly used in the Synergy bumper, rocker, and skid plate type components
- Grey is mainly used in the Synergy suspension type components
- Exact color match to Synergy branded products
- Fast Dry
- Low VOC content
- Easy to apply
The 2.0 Performance Series Shocks delivers race-dominating performance in a hassle free bolt-on package. Fox's industry leading and race dominating performance in an affordable, hassle-free bolt on package. Its heat reducing design includes a metal impacted clear anodized aluminum shock body that dissipates heat faster than a conventional steel body shock. Its external reservoir allows for increase oil and nitrogen capacity while delivering striking race look. The included black anodized reservoir mounting clamp and other components are CNC machined from 6061-T6 aluminum. The race developed high flow damping piston matched with application specific vavling provides the 2.0 Performance Series Reservoir shock a predicable ride quality capable of handling the roughest road conditions.
CD Adjuster model delivers 8 clicks of compression adjustability - from very soft to very firm.
Specifications:
- Body - 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
- Body Plating - Clear-anodized for a durable finish
- External Reservoir - 2.0" Smooth bore 6061-T6 Aluminum is hard anodized
- Components - Black-anodized, CNC-machined 6061-T6 billet aluminum
- Shaft - 5/8" hard chrome plated heat-treated alloy steel
- Piston - Race-developed high-flow piston design
- Valving - Application specific valving to maximize offroad performance
- Seals - Redundant sealing pack system main seal, wiper seal, scraper seal
- Oil - JM92 Advanced Suspension Fluid for improved performance at variable temperatures
- Bushing - Quiet nitrile rubber allows for increased suspension articulation
- Mounting - Applications available for stock and aftermarket lifts kits
Adjustments:
- Nitrogen pressure
- Compression valving
- Rebound valving
- CD Adjuster - 8 clicks of compression adjustability (CD Adjsuter models only)
Part # | Model | CD Adjuster | Year | Position | Lift |
---|---|---|---|---|---|
FOX-985-24-011 | Jeep Wrangler JK 2WD/4WD | No | 2007+ | Front | 4-6" |
FOX-985-24-012 | Jeep Wrangler JK 2WD/4WD | No | 2007+ |
Rear | 4-6" |
FOX-985-24-013 | Jeep Wrangler JK 2WD/4WD | No | 2007+ |
Front | 6.5-8" |
FOX-985-24-014 | Jeep Wrangler JK 2WD/4WD | No | 2007+ |
Rear | 6.5-8" |
FOX-985-24-015 | Jeep Wrangler JK 2WD/4WD | No | 2007+ |
Front | 1.5-3.5" |
FOX-985-24-016 | Jeep Wrangler JK 2WD/4WD | No | 2007+ |
Rear | 1.5-3.5" |
Part # |
Model | CD Adjuster | Year | Position | Lift |
FOX-985-26-011 | Jeep Wrangler JK 2WD/4WD | Yes | 2007+ | Front | 4-6" |
FOX-985-26-012 | Jeep Wrangler JK 2WD/4WD | Yes | 2007+ |
Rear | 4-6" |
FOX-985-26-013 | Jeep Wrangler JK 2WD/4WD | Yes | 2007+ |
Front | 6.5-8" |
FOX-985-26-014 | Jeep Wrangler JK 2WD/4WD | Yes | 2007+ |
Rear | 6.5-8" |
FOX-985-26-015 | Jeep Wrangler JK 2WD/4WD | Yes | 2007+ |
Front | 1.5-3.5" |
FOX-985-26-016 | Jeep Wrangler JK 2WD/4WD | Yes | 2007+ |
Rear | 1.5-3.5" |

