9 products
This level kit offers a cost effective way to level your truck, at the lowest price point possible without sacrificing ride. Our kit pairs a set of 5100 shocks with Carli's soft ride 2.5" lift coils. The result dramatically improves ride, doubles front suspension travel, and levels the truck by increasing front height 2.5" over factory. This system also retains full factory payload and towing.
The front axle will be slightly pulled to the Driver’s side following installation of this level, which can be corrected with Carli's track bar.
THIS IS A DIESEL ONLY SYSTEM, if you have a gas truck please email us so we can get you set up with something that fits. This system fits Dodge Ram 2500 4x4 trucks from 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and 2023 with factory rear coil springs. We offer these systems for Ram 2500s with factory rear air suspension.
We recommend a 35” tire on an 18” wheel that’s no more than 9” wide with 0 to +27 offset. To fit 37s on a Ram truck we recommend a +18 to +27 offset wheel that is no wider than 9,” as well as some mild trimming of the plastic fender liner and maybe pinch weld depending on the tire.
Recommended unloaded tire pressure is 45F/40R. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.
INCLUDES
-Front standard Bilstein 5100 shocks
-Front Carli Linear Rate 2.5" Lift Coils
OPTIONAL
- Add matching standard 5100 rear shocks and or a Carli track bar
SPECIFICATIONS
-2.5" Front Lift
-Stock Rear Height/Towing Capacity
-Level Ride Height
-Designed for Diesel Applications Only
INSTRUCTIONS:
| Front Lift | Rear Lift | Front Travel | Rear Travel | Shock Diameter | Tire Fitment |
|---|---|---|---|---|---|
| 2.5″ | 0″ | 9″ | 9″ | 2.0″ | 35″ / 37" |
Customer Reviews
Based on 2 reviews
Write a review
Customer Reviews
Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Truck rides soft on the bumps now but still composed and leveled the truck as it shoulda been! Best money spent on a truck in a long time!
B
I had the rough country 2.5 spacer lift on factory springs and factory upgraded bilstein shocks with the sport package. It rode like a lumber wagon after the install. These shocks and springs really help smooth out the ride. If you're torn between the two because of money... Buy this kit and only cry once. Install was pretty easy, just take your time.
O
I feel much different than the stock suspension
Feel more smooth ride
Carli Suspension went back to the drawing board to make the best leveling kit on the market. While there's plenty of other coil and shock levels, the attention to detail and custom tuning set this one apart from the pack. Carli developed their own completely one off shock package for this system, with custom pistons, lengths, and tuning specifically designed around their front coils, and the factory rear coils on the 2014+ Ram platform. After weeks of tuning and 40+ revisions, the result is the smoothest riding leveling kit on the market for these trucks. While this system used to be offered with Carli's custom Fox shocks, the new in house shock package offers better ride, improved internal oil flow, and an easier to rebuild/service shock design. These shocks are the next step in the evolution and we're excited to offer them!
Carli also uses a tuned linear rate front coil that dramatically improves ride, doubles front suspension travel, and levels the truck by increasing front height 2.5" over factory. The front axle will be slightly pulled to the driver’s side following installation of this level, which can be corrected with Carli's track bar. We recommend adding this from both a geometry correction and handling perspective.
Carli also uses a tuned linear rate front coil that dramatically improves ride, doubles front suspension travel, and levels the truck by increasing front height 2.5" over factory. The front axle will be slightly pulled to the driver’s side following installation of this level, which can be corrected with Carli's track bar. We recommend adding this from both a geometry correction and handling perspective.
THIS IS A DIESEL ONLY SYSTEM, if you have a gas truck please email us so we can get you set up with something that fits. If your truck has factory air ride rear, Carli has specific systems designed for your truck that can be found here.
UPGRADE OPTIONS:
The Carli track bar allows you to correct the front end geometry after the height increase, but more importantly the Carli track bar is significantly more durable than the stock unit to allow for a longer lifespan and more direct steering feel. Simply put, Ram's factory track bar is the weakest point on the front end of these trucks and leads to wander / death wobble. The Carli track bar is the highest quality replacement option on the market. If there's one upgrade to make, this is it.
The torsion sway bar is a great upgrade as it allows for easier articulation and smoother ride with single sided bumps. Instead of the stiff, stock sway bar throwing you out of your seat over ruts or in/out of driveways, a torsion sway bar will glide right over those features and allow the suspension to soak things up without transferring that energy to the cab. If you want to maintain the stock sway bar, select no sway bar. Please note this is only compatible with a Synergy box brace, or no box brace.
Carli Steering Stabilizers aren't necessary with stock size tires, but if you're running 35s or 37s, it's a great way to reduce steering feedback from the road as larger tires quickly overwhelm the stock steering stabilizer. Choose the high mount for aggressive mid terrain tires, the low mount for everything else, and the dual opposing setup for the best possible handling and least steering feedback. If you want more info on stabilizers, give this video a watch. Please note that high mount stabilizer options ONLY work with factory linkage. They are not compatible with Synergy steering.
Carli Radius Arms and Drops are not a mandatory upgrade. Carli radius arms offer additional strength, improved ride/articulation, and better tire clearance that factory. The drops flatten arm angle, and reduce any possible coil bow, but we usually save the drops for the 3.25" Carli coil systems.
This system fits Dodge Ram 2500 4x4 trucks from 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023 with factory rear coil springs. We offer these systems for Ram 2500s with factory rear air suspension.
Wheel/Tire Recommendations:
We recommend a 35” tire on a 18” wheel that’s no more than 9” wide with 0 to +27 offset for zero trimming with this level kit. To fit 37s on a Ram truck, we recommend a +12 to +27 offset wheel that is no wider than 9,” as well as some mild trimming of the plastic fender liner and maybe pinch weld depending on the tire.
If you run larger than stock tires, please note that you need to adjust tire pressure accordingly. This video covers that process in detail, and is key to achieving proper ride quality and tire wear. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.
INCLUDES
-Front Carli-SPEC 2.0 IFP Carli Tuned Shocks
-Rear Carli-SPEC 2.0 IFP Carli Tuned Shocks
-Front Linear Rate Coils
SPECIFICATIONS
-2.5" Front Lift
-Stock Rear Height/Towing Capacity
-Level Ride Height
-Designed for Diesel Applications Only
INSTRUCTIONS:
INSTALL HOW TO VIDEO:
| Front Lift | Rear Lift | Front Travel | Rear Travel | Shock Diameter | Tire Fitment |
|---|---|---|---|---|---|
| 2.5″ | 0″ | 9″ | 9″ | 2.0″ | 35″ / 37" |
Customer Reviews
Based on 2 reviews
Write a review
This system combines Carli 2.5" lift front coils, Carli-SPEC 2.0 shocks, and a Thuren 2 wheel drive front track bar to finally give an option for people looking to level their 2014 and newer 2wd Dodge Ram 2500 trucks! This system is a dramatic improvement in ride quality compared to a spacer, and comes with everything you need to lift the front end 2.5," improve ride, and maintain correct geometry.
THIS IS A DIESEL ONLY SYSTEM FOR TWO WHEEL DRIVE TRUCKS ONLY
This system fits Dodge Ram 2500 2x4 trucks from 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 and 2022 with factory rear coil springs.
There is FINALLY an option other than spacers for 2wd Cummins Ram 2500 trucks!
INCLUDES
-Thuren Suspension 2wd track bar
-Front/Rear Carli-SPEC 2.0 Shocks
-Front Linear Rate 2.5" lift Coils
SPECIFICATIONS
-2.5" Front Lift
-Stock Rear Height/Towing Capacity
-Designed for Diesel Applications Only
| Front Lift | Rear Lift | Front Travel | Rear Travel | Shock Diameter | Tire Fitment |
|---|---|---|---|---|---|
| 2.5″ | 0″ | 9″ | 9″ | 2.0″ | 35″ x 12.5″ |
Customer Reviews
Based on 2 reviews
Write a review
