Carli's ball joints start out as a chunk of specialty chosen material which is machined to Carli's unique design and then heat treated to a specified rockwell (hardness). From there the ball joints head to an aero-space lube company where a proprietary dry-lube coating is applied to their specified thickness. Carli tops them off with an accessible zerk fitting for easy servicing, plus they even include a tube of high quality synthetic grease with each ball joint set.
SPECIFICATIONS
-Warrantied for life. -In lieu of enumerating the materials, processes, and design characteristics of Carli's Ball Joints, they're just going to stand behind this component for as long as you own it. If for any reason the performance of Carli's Ball Joint declines, Carli will stand behind it. For the life of your purchase. After the finalization of the R&D process Carli is confident that this part will never fail.
2006 Ram 3500 drives like a dream after these bad boys were installed! Highly recommend!!
F
Fred Lindy
Amazing Customer Service
Called to ordered Carli suspension parts that I needed for an upcoming trip. I asked if CJC could put a rush on processing. Had my parts in a few days. THANK YOU. Definitely buying parts from them again
G
Gary Cornett
Carli Joints
These are well engineered and built well, totally worth the Money, it will be the last pair of Jack Joints and U-joints you will need to purchase
Carli Suspension went back to the drawing board to make the best leveling kit on the market. While there's plenty of other coil and shock levels, the attention to detail and custom tuning inside set this one apart from the pack. After months of tuning, Carli enlisted Fox to custom build shocks specifically for the 14+ Ram 2500 platform, and create unique valving for the front Carli coils and factory rear coils. Designated by a unique shock part number, these shocks are different from any other kit on the market.
Carli also uses a tuned linear rate coil that dramatically improves ride, doubles front suspension travel, and levels the truck by increasing front height 2.5" over factory.
The front axle will be slightly pulled to the Driver’s side following installation of this level, which can be corrected with Carli's track bar.
This system fits Dodge Ram 2500 4x4 trucks from 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023 with factory rear coil springs. We offer these systems for Ram 2500s with factory rear air suspension.
We recommend a 35” tire on an 18” wheel that’s no more than 9” wide with 0 to +27 offset. To fit 37s on a Ram truck we recommend a +18 to +27 offset wheel that is no wider than 9,” as well as some mild trimming of the plastic fender liner and maybe pinch weld depending on the tire.
Recommended unloaded tire pressure is 45F/40R. The addition of a Carli Low-Mount Steering Stabilizer is recommended for any tire over factory size.
THIS IS A DIESEL ONLY SYSTEM, if you have a gas truck please email us so we can get you set up with something that fits.
INCLUDES
-Front Fox 2.0 IFP Carli Tuned Shocks -Rear Fox 2.0 IFP Carli Tuned Shocks -Front Linear Rate Coils
SPECIFICATIONS
-2.5" Front Lift -Stock Rear Height/Towing Capacity -Level Ride Height -Designed for Diesel Applications Only
This kit was recommended to me by CJC with a torsion sway bar and it has really upgraded my 2016 Ram 2500 Cummins. I had a basic leveling kit on it, which was terrible, with upgraded Bilstein 5100s, Synergy drag link and Rough Country steering stabilizer.
This product and the carli torsion sway bar are the single biggest upgrade for my truck. Hands down much smoother driving now, daily. No longer feels like a farm truck.
Quick shipping from CJC and a great improvement in the ride over the puck leveling kit I previously had. I highly recommend it. Pretty easy install, me and a buddy did it in the driveway in about 1.5 hours.
CARLI SUSPENSION 03-13 Carli Dodge Ram Adjustable Track Bar
14 reviews
CS-DATB-03
Free Ships in 1-5 Business Days
Regular price
$520.00
Save $-520.00
Carli's new 2003-2013 Dodge Ram 2500/2003-2012 3500 4x4 adjustable track bar is a must for any Dodge 2500/3500 4x4 suffering from wandering steering or with an aftermarket lift. The track bar will center the axle side to side and ensure proper suspension geometry. The track bar will also give a tighter feel to the front end by eliminating the O.E.M rubber bushings. Included with each track bar are all required spacers, crush sleeves, and shims to fit each specific vehicle's stock hardware. On one end is a custom F.K. Heim Joint that offers articulation and rigidity with an improved service life over other styles of bushing. On the opposite end is an heavy duty captured uniball bearing for maximum strength and life-span. A laser-cut gusset surrounds the uniball welded cup to ensure that this track bar will be the last you ever buy.
SPECIFICATIONS
-Constructed from 1.50" x .375" wall Chromoly tube -CNC bent for perfect fitment -Fixture-welded in house -Pre-loaded captured bushing -Captured 7/8" FK Uniball on frame side and heim joint on the axle side -Includes misalignment spacers -Includes sleeves for both 14MM and 16MM applications
FITMENT
Fits 1994-2013 Dodge Ram 2500 4x4 and 1994-2012 Dodge Ram 3500 4x4 trucks. Fitment on 1994-2002 trucks is possible with a 3rd Party conversion bracket, but we cannot guarantee fit or clearance.
This part is beefy and easy to install. I did find that, even with the provided bushing, I had to drill out my frame holes and go with a bigger bolt. Awesome company, great parts, and extremely fast shipping.
A
Alex
awesome 5star service
awesome 5star service..awesomes guys and built quality parts.. thank your for your time and business
G
George Poitra
CARLI SUSPENSION 03-13 Carli Dodge Ram Adjustable Track Bar
D
Dave
Carli track bar 2007 ram 2500
Track bar was a much needed step in tightening the feel of the steering and front axle functions of the truck. Made the truck feel better than new.
B
Brian Hergenreder
Carli track bar 05 Cummins
The carli suspension track bar came in a nice box protected very nicely. Once I got this installed it was crazy how much the play in the steering had gone away. 5 stars for sure.
Carli Suspension 2014+ Dodge Ram Low Mount Steering Stabilizer
11 reviews
CS-DLMSS-14
Free Ships in 1-5 Business Days
Regular price
$340.00
Save $-340.00
The Carli suspension stainless low mount steering stabilizer is the highest quality steering stabilizer for the Ram platform. Mounting in the factory location, it's also about as easy of an install as it gets! This stabilizer offers a massive improvement in damping force compared to factory, meaning you get less feedback in your steering wheel from the road.
Carli uses proprietary stabilizers with a custom valving profile and small shaft diameter to offer maximum damping and impact resistance without negatively impacting steering feel. Their fully-rebuildable construction boasts a Stainless Steel body with Machined Billet Aluminum Rod ends housing precision 1/2” Spherical Bearings topped off with a hardened Black Nitride Shaft. The stabilizer's nitrogen chamber is adjustable from 40psi to 200psi allowing customers to correct for radial tire-pull in various configurations. If no pull exists, the Stabilizer can be set from 40-70psi as this neutral range will pressurize the stabilizer for proper function without push in either direction. The more you charge the stabilizer, the more it will push in the direction of extension to correct for tire pull. This stabilizer will correct for a right hand pull.
If you have any questions about what stabilizer is right for you, don't hesitate to call and ask! If you want an in depth explanation of stabilizer function, read this.
This stabilizer is NOT compatible with 2013+ Synergy steering.
Couldn’t be more impressed with this well built, adjustable, high quality stabilizer. You can clearly tell what roll it plays in your steering. You can’t go wrong if considering Carli for your straight axle truck!!
J
Josh Espinoza
Nice and tight!
Put this on my 2022 ram 2500 6.7 cummins. Works great at 80psi nice and tight!
K
Kevin Schruben
Left pull
This correct my left pull, no adjustments needed to the nitrogen. Steering is much better now
S
Sam Vice
Do it you won't regret it
Outstanding customer service and top notch products very pleased with the ride quality of my 14 ram 3500 I went with the commuter and got the track bar.& Low mount steering stabilizer
M
Manny Todd
Carli Suspension 2014+ Dodge Ram Low Mount Steering Stabilizer
Carli 2017+ Ford Super Duty High Mount Stainless Stabilizer
4 reviews
CS-FHMSS-17
Free Ships in 3-5 Days
Regular price
$370.00
Save $-50.00
Carli's Super Duty High-Mount Steering Stabilizer is a factory location drag link mount replacement stabilizer, with everything factory thrown out the window. Instead, Carli went back to the drawing board to design the best stabilizer possible. It features a Stainless Steel body, hardened Nitride Shafts, and precision bearings for long lasting performance and appearance. Its custom designed bracket maintains factory fitment while allowing maximum turning radius. Just like their shocks, Carli custom builds and tunes all their stabilizers specifically for each vehicle platform. This means that the stabilizer is able to massively reduce road feedback, without impacting steering feel negative.
Carli went a step further by nitrogen pressure adjustment to this stabilizer. 40-70 psi sets the stabilizer neutral to just control road feedback. 70-200 psi causes the stabilizer to push in the direction of extension, which fights tire pull that would otherwise be unsolvable. We also offer a Carli low mount (tie rod mount), or Carli true dual opposing stabilizer pair for people wanting the best of the best!
SPECIFICATIONS
-Carli Suspension Stainless Steel Stabilizer Mounts out of harm's way -Custom tuned for Super Duty 4x4s
FITMENT
This steering stabilizer is intended to fit LEVELED/LIFTED HEIGHT 2017- current Ford Super Duty 4x4 trucks. This will not fit on F-450 trucks. No confirmed fitment with Dropped Pitman Arms
Significant ride improvement over stock, can drive down a rough dirt road comfortably at twice my previous speed, torsion sway bar eliminated half the rubbing of 37X12.50 on stock wheels.
B
Brett K
Commuter 2.5 for a 2017 For F250 and torsion sway bar with end links
Wanted to level my truck out but with a suspension level and it seemed Carli had what I was looking for along with the torsion sway bar and end links. The stance on the truck is exactly what I wanted. I’m running falken ATW3 37x12.50x18 with black rhino arsenal 18 inch wheels with a +12 offset. I have no rub in a parking lot but some minimal rubbing when I hit any dips on the inner fender. Too easy to fix. Just had it all installed at Southern Sinners in NC, install was seamless and I expect the level/suspension level will be the same. Super pleased.
R
Ryan Espoy
So glad I got this!
I have a 2022 F-250 that I put a 3.5” Pintop kit and 37x12.5r18 Falken Wildpeak AT3’s. At first I thought I wouldn’t need this since the wildpeak are so tame… but I noticed the truck tended to wander a bit on the road. After putting this one, with no adjustments to the pressure, the trucks drives like a dream and tracks perfectly! Definitely worth the coin!
J
James Taylor
2020 f350
Rides smooth , handles large bumps much better and no steering wheel wobble
Carli Ford F250/350/450 Super Duty 2017+ Leveling 2.5" Sway Bar Drop Brackets
11 reviews
CS-FSBD-LVL-17
Free Ships in 1-5 Business Days
Regular price
$90.00
Save $-90.00
Carli's Sway Bar Drop Brackets for 2017+ Ford F250/F350 Super Duty trucks are designed to properly relocate the front sway bar to help prevent binding and other sway bar-related issues on trucks with 2.5" of lift. These sway bar drop brackets are custom fabricated and come in a powder coated finish.
SPECIFICATIONS
-Designed for trucks with 2.5" of lift
INCLUDES
-Pair of sway bar drop brackets for both sides of factory front sway bar -Includes necessary hardware